Heavy Chipboard 2mm - Pack of 5 Sheets 28x28cm

More information about the Heavy Chipboard 2mm

INDEX

> Description

> Things to keep in mind

> Tips and tricks

> Usage recommendations

> Measurements

DESCRIPTION

• Use it naturally or add paint, glitter, and gloss to create signs, board games, home decor, and much more
• Can be cut with a cutter or guillotine, provided they can handle materials with a 2 mm thickness
• Pack of 5 sheets with straight, precise, and uniform edges

THINGS TO KEEP IN MIND

• Avoid cutting less than 7 mm from the edge of the cardboard
• Cutting small images or patterns may cause inconsistent cuts or damage to the blade
• If a small piece falls off while cutting the cardboard: stop the cutter, remove the piece without removing the mat, and then resume the cutting process

TIPS AND TRICKS

• Prevent the cardboard from moving during cutting by using a StrongGrip cutting mat and adhesive tape to secure it. See Related Products

USAGE RECOMMENDATIONS

• Unpack the cardboard sheets 24 hours before use and keep them on a flat surface. If the cardboard has warped, place a heavy object on top
• Adhere the cardboard sheet to the cutting mat
• Place adhesive tape on the four corners of the cardboard sheet, at least 1 mm from the edge
• Before placing the cardboard in the cutter, ensure that none of its components will mark the surface of the sheet when inserted into the machine (rollers, wheels...)
• Insert your Knife Blade into your Cricut Maker
• Check the cut before removing the mat from the cutter in case an additional cut pass is needed

MEASUREMENTS