3D Effect Heat Transfer Vinyl - Poli-Flex Image Dimension from Poli-Tape

3D-effect heat transfer vinyl to create embossed designs.

  • Made of 600 μ thick ecological polyurethane in a matte finish
  • Suitable for cotton, mixtures of polyester/cotton or polyester/acrylic fabrics without water-repellent coating
  • Sale unit: 1 m, 5 m and 10 m rolls, 50 cm wide

More information

Availability:
Shown on each product
Reward Points
Get free € to redeem on your next order by buying these products. Discover the Brildor Loyalty Program Get free € to redeem on your next order by buying these products. Discover the Brildor Loyalty Program

More information about the 3D Effect Heat Transfer Vinyl - Poli-Flex Image Dimension from Poli-Tape

 

INDEX

> Description

> Things to keep in mind

> Technical characteristics

> Transfer parameters

> Application instructions

> Washing recommendations

> Weight

> Colour card

> Data sheets

> Safety data sheet

 

DESCRIPTION

POLI-FLEX IMAGE DIMENSION 3D effect is a hot-melt adhesive film (600 µ) for textile transfer.

  • The liner is a non-adhesive PET (polyester) film
  • Available in different colours with white backing and border, except for the black, which comes all in black
  • The 10-metre roll has a Ø7.5 cm cardboard core
  • Oeko-Tex Standard 100 Class I certifies that it is suitable for application on baby and children's clothing
  • Made in Germany by Poli-Tape

 

THINGS TO KEEP IN MIND

  • Due to its thickness, it is recommended to avoid highly detailed designs, as this could make it difficult to cut and weed the vinyl
  • Do not transfer on nylon and textiles with hydrophobic impregnation In this case, we recommend using Poli-Flex Nylon
  • If you use a Silhouette Cameo, apply the following settings: blade 8, speed 5, force 20 and 3 passes

 

TECHNICAL CHARACTERISTICS

Vinyl Ecological polyurethane
Thickness (µ) 600
Support or liner PET film (non-adhesive)
Includes transporter Yes
Fabrics Cotton, cotton-polyester and polyester-acrylic blends
Cutting blade for vinyl cutter 60º
Laser cutting Yes
Overlappable(*) Yes
Discard Hot/Cool

(*) It can be over-coated with another layer of vinyl to create multi-coloured composite designs

 

TRANSFER PARAMETERS

  • Knife blade: 60º
  • Temperature: 160ºC
  • Pressure: 3.0 bar [medium pressure]
  • Time: 25 seconds

 

APPLICATION INSTRUCTIONS

  • Cut the HTV in mirror image
  • Weed out your excess vinyl
  • Preheat the press to 160ºC
  • Place the garment on the press and pre-press for 4-5 seconds to remove wrinkles and moisture
  • Position the vinyl on the garment
  • Press for 25 seconds, medium pressure
  • Cool peel the liner

 

WASH RESISTANCE

  • Withstands up to 60ºC
  • Do not tumble dry
  • Do not dry clean
  • Wash inside out

 

WEIGHTS

Roll 1 5 10
Weight (kg) 0.4 2 4.5

 

COLOUR CARD

Colour card for Poli-Flex Image (.pdf - 2.93 MB)

 

DATA SHEETS

Data sheet Poli-Flex Image Dimension (.pdf - 0.03 MB)

Transfer and wash conditions (.pdf - 0.14 MB)

 

SAFETY DATA SHEET

When used under normal conditions, this product does not generate or release any dangerous substances or hazardous chemicals. This is a non-hazardous product in accordance with the current GefStoffV and EU criteria. Therefore it is not necessary to prepare a Material Safety Data Sheet for this product. The Safety Data Sheet serves only to comply with the regulation to supply information in accordance with REACH Regulation (EC) No. 1907/2006 and is available on request. This is not a hazardous product with regards to transportation legislation; neither does it contain substances that are hazardous to water within the meaning of the federal water act. After use, dispose of the waste product in accordance with the local/national authorities.

More Information
Ref. 924680
Write Your Own Review
Post your question