Flexible polyurethane resin similar to methacrylate
Its flexibility allows you to create parts that can be bent but not stretched
Non-yellowing, good adhesion and resistant to erosion, high temperatures and UV rays
They are presented in bottles with safety caps, to prevent improper use
THINGS TO KEEP IN MIND
The mixture should have a 1:1 ratio. You will get 2 L of resin to apply
Do not add more hardener than the indicated ratio
Wear gloves to avoid skin irritation
It is advisable to let it dry: in the oven for 4 hours (35-40 ºC) and outdoors for 24 hours (27 ºC)
STORAGE RECOMMENDATIONS
In order for this product to maintain its chemical properties and not suffer alterations, the storage space should comply with the following conditions:
Cool place with an average temperature between 15 ºC and 25 ºC
Dry environment with humidity less than 50%
Do not expose to UV light
PRECAUTIONS BEFORE OPENING
Upon receipt of the package from the transport agency, wait 24 hours before opening the jars of this product. During this time, keep them in a cool, dry place, without moving them
TIPS AND TRICKS
Use a scale to weigh the amount of each component separately
Mix both components for 5 minutes until you have a homogeneous dough
Use a blowtorch to break up the bubbles when you let the mixture rest
Add pigments or glitter to the mix to customize the resin
Clean resin residue with acetone or alcohol while it's wet. Once the resin has cured and dried, it can be broken down by soaking it in acetone or alcohol and soaking it
https://www.brildor.com/en/epoxy-resin-flexible-crafts44607Epoxy Resin Flexible for Crafts<p><a name="saber-mas"></a></p>
<h2>More information about the Epoxy Resin Flexible for Crafts</h2>
<p> </p>
<p><strong>INDEX</strong></p>
<p>> <a href="#saber-mas1">Description</a></p>
<p>> <a href="#saber-mas2">Things to keep in mind</a></p>
<p>> <a href="#saber-mas6">Storage recommendations</a></p>
<p>> <a href="#saber-mas7">Precautions before opening</a></p>
<p>> <a href="#saber-mas5">Instructions for use</a></p>
<p>> <a href="#saber-mas4">Tips and tricks</a></p>
<p>> <a href="#saber-mas3">Technical data</a></p>
<p> </p>
<p><a name="saber-mas1"></a></p>
<p><strong>DESCRIPTION</strong></p>
<ul>
<li>Flexible polyurethane resin similar to methacrylate</li>
<li>Its flexibility allows you to create parts that can be bent but not stretched</li>
<li>Non-yellowing, good adhesion and resistant to erosion, high temperatures and UV rays</li>
<li>They are presented in bottles with safety caps, to prevent improper use</li>
</ul>
<p> </p>
<p><a name="saber-mas2"></a></p>
<p><strong> THINGS TO KEEP IN MIND</strong></p>
<ul>
<li>The mixture should have a 1:1 ratio. You will get <span class="azul-negrita">2 L</span> of resin to apply</li>
<li>Do not add more hardener than the indicated ratio</li>
<li>Wear gloves to avoid skin irritation</li>
<li>It is advisable to let it dry: in the oven for <span class="azul-negrita">4 hours</span> (<span class="azul-negrita">35-40 ºC</span>) and outdoors for <span class="azul-negrita">24 hours</span> (<span class="azul-negrita">27 ºC</span>)</li>
</ul>
<p> </p>
<p class="enlace"><a id="saber-mas6"></a> </p>
<p><strong>STORAGE RECOMMENDATIONS</strong></p>
<p>In order for this product to maintain its chemical properties and not suffer alterations, the storage space should comply with the following conditions:</p>
<ul>
<li>Cool place with an average temperature between <span class="azul-negrita">15 ºC</span> and <span class="azul-negrita">25 ºC</span></li>
<li>Dry environment with humidity less than <span class="azul-negrita">50%</span></li>
<li>Do not expose to UV light</li>
</ul>
<p> </p>
<p class="enlace"><a id="saber-mas7"></a> </p>
<p><strong>PRECAUTIONS BEFORE OPENING</strong></p>
<ul>
<li>Upon receipt of the package from the transport agency, <strong>wait 24 hours before </strong>opening the jars of this product. During this time, keep them in a cool, dry place, without moving them</li>
</ul>
<p> </p>
<p><a name="saber-mas4"></a></p>
<p><strong>TIPS AND TRICKS</strong></p>
<ul>
<li>Use a scale to weigh the amount of each component separately</li>
<li>Mix both components for <span class="azul-negrita">5 minutes</span> until you have a homogeneous dough</li>
<li>Use a blowtorch to break up the bubbles when you let the mixture rest</li>
<li>Add pigments or glitter to the mix to customize the resin</li>
<li>Clean resin residue with acetone or alcohol while it's wet. Once the resin has cured and dried, it can be broken down by soaking it in acetone or alcohol and soaking it</li>
</ul>
<p> </p>
<p><strong>TECHNICAL DATA</strong></p>
<table>
<tbody>
<tr>
<td><strong>Quantity per tub (kg)</strong></td>
<td><span class="azul-negrita">1</span></td>
</tr>
<tr>
<td><strong>Working time</strong><br><strong>before starting to harden</strong><br><strong>(min)</strong></td>
<td><span class="azul-negrita">30</span></td>
</tr>
<tr>
<td><strong>Finish</strong></td>
<td>Flexible</td>
</tr>
<tr>
<td><strong>Weight (kg)</strong></td>
<td><span class="azul-negrita">1,1</span></td>
</tr>
</tbody>
</table>
<p> </p>https://www.brildor.com/media/catalog/product/r/e/resina-epoxi-flexible-endurecedor-bote-1-kilo-d7.jpg33.9instock033.9000https://www.brildor.com/media/catalog/product/r/e/resina-epoxi-flexible-endurecedor-bote-1-kilo-d7.jpg199562769743095433964365651860/Resin Drop/Arts & Crafts/Arts & Crafts/Scrapbooking Supplies2022-05-09T12:23:45+0000
