Transparent resins with glitter to fill moulds with shapes and create letter key rings, bookmarks with encapsulated dried flowers, pieces of jewellery...
Thermosetting polymers similar to methacrylate. High resistance to water, wear, scratches, impact and deformation
Self levelling formula. Fills any space creating a smooth and uniform layer
UV resistant. Non-yellowing
Supplied in bottles with safety caps to prevent misuse
THINGS TO KEEP IN MIND
Once you have mixed the resin and hardener in the correct ratio, you will get a ready-to-use mixture of 480 ml
Do not add more hardener than the indicated ratio
Wear gloves to avoid skin irritation
It is advisable to allow at least 24 hours for curing
The date on the cans corresponds to the date of manufacture
The container should be 50 % larger than the mixture to allow sufficient space for stirring
STORAGE RECOMMENDATIONS
In order for this product to maintain its chemical properties and not suffer alterations, the storage space should comply with the following conditions:
Cool place with an average temperature between 15 ºC and 25 ºC
Dry environment with humidity less than 50%
Do not expose to UV light
PRECAUTIONS BEFORE OPENING
Upon receipt of the package from the transport agency, wait 24 hours before opening the jars of this product. During this time, keep them in a cool, dry place, without moving them.
TIPS AND TRICKS
Pigments the resin with specific dyes to obtain a wide range of colours and decorative effects
Work in smaller quantities to prevent the mixture from hardening
Mix the resin slowly for about 3 minutes to avoid the formation of bubbles
To break up any bubbles that may appear during resin application, apply heat with a blowtorch
https://www.brildor.com/en/epoxy-resins-crafts51864Epoxy Resins for Crafts<p class="enlace"><a id="saber-mas"></a> </p>
<h2>More information about Epoxy Resins for Crafts</h2>
<p> </p>
<p><strong>INDEX</strong></p>
<p>> <a href="#saber-mas1">Description</a></p>
<p>> <a href="#saber-mas4">Things to keep in mind</a></p>
<p>> <a href="#saber-mas6">Storage recommendations</a></p>
<p>> <a href="#saber-mas7">Precautions before opening</a></p>
<p>> <a href="#saber-mas6">Tips and tricks</a></p>
<p>> <a href="#saber-mas7">Technical data</a></p>
<p> </p>
<p class="enlace"><a id="saber-mas1"></a> </p>
<p><strong>DESCRIPTION</strong></p>
<ul>
<li>Thermosetting polymers similar to methacrylate. High resistance to water, wear, scratches, impact and deformation</li>
<li>Self levelling formula. Fills any space creating a smooth and uniform layer</li>
<li>UV resistant. Non-yellowing</li>
<li>Supplied in bottles with safety caps to prevent misuse</li>
</ul>
<p> </p>
<p class="enlace"><a id="saber-mas4"></a> </p>
<p><strong>THINGS TO KEEP IN MIND</strong></p>
<ul>
<li>Once you have mixed the resin and hardener in the correct ratio, you will get a ready-to-use mixture of <span class="azul-negrita">480 ml</span></li>
<li>Do not add more hardener than the indicated ratio</li>
<li>Wear gloves to avoid skin irritation</li>
<li>It is advisable to allow at least<span class="azul-negrita"> 24 hours</span> for curing</li>
<li>The date on the cans corresponds to the date of manufacture</li>
<li>The container should be <span class="azul-negrita">50 %</span> larger than the mixture to allow sufficient space for stirring</li>
</ul>
<p> </p>
<p class="enlace"><a id="saber-mas6"></a> </p>
<p><strong>STORAGE RECOMMENDATIONS</strong></p>
<p>In order for this product to maintain its chemical properties and not suffer alterations, the storage space should comply with the following conditions:</p>
<ul>
<li>Cool place with an average temperature between <span class="azul-negrita">15 ºC</span> and <span class="azul-negrita">25 ºC</span></li>
<li>Dry environment with humidity less than <span class="azul-negrita">50%</span></li>
<li>Do not expose to UV light</li>
</ul>
<p> </p>
<p class="enlace"><a id="saber-mas7"></a> </p>
<p><strong>PRECAUTIONS BEFORE OPENING</strong></p>
<ul>
<li>Upon receipt of the package from the transport agency, <strong>wait 24 hours before </strong>opening the jars of this product. During this time, keep them in a cool, dry place, without moving them.</li>
</ul>
<p> </p>
<p class="enlace"><a id="saber-mas6"></a> </p>
<p><strong>TIPS AND TRICKS</strong></p>
<ul>
<li>Pigments the resin with specific dyes to obtain a wide range of colours and decorative effects</li>
<li>Work in smaller quantities to prevent the mixture from hardening</li>
<li>Mix the resin slowly for about <span class="azul-negrita">3 minutes</span> to avoid the formation of bubbles</li>
<li>To break up any bubbles that may appear during resin application, apply heat with a blowtorch</li>
</ul>
<p> </p>
<p class="enlace"><a id="saber-mas7"></a> </p>
<p><strong>TECHNICAL DATA<br></strong></p>
<table>
<tbody>
<tr>
<td><strong>Part number</strong></td>
<td style="text-align: center;"><strong>053379</strong></td>
</tr>
<tr>
<td><strong>Mixing ratio<br></strong></td>
<td style="text-align: center;"><span class="azul-negrita">1:1</span>(<span class="azul-negrita">A:B</span>)<br>1 part of resin to 1 part <br>hardener<span class="azul-negrita"><br></span></td>
</tr>
<tr>
<td><strong>Format bi-component </strong><br><strong>(bottles) (ml)<br></strong></td>
<td style="text-align: center;">Resin <span class="azul-negrita">240<br></span>Hardener <span class="azul-negrita">240</span></td>
</tr>
<tr>
<td><strong>Finish</strong></td>
<td style="text-align: center;">Stiff</td>
</tr>
<tr>
<td><strong>Examples<br></strong></td>
<td style="text-align: center;">Jewellery, decorative elements, <br>encapsulations, coaster</td>
</tr>
<tr>
<td><strong>Weight (g)<br></strong></td>
<td style="text-align: center;"><span class="azul-negrita">567</span></td>
</tr>
</tbody>
</table>https://www.brildor.com/media/catalog/product/r/e/resina_epoxi_transparente_manualidades_recubrimientos_d7.jpg14.95outofstock014.95000https://www.brildor.com/media/catalog/product/r/e/resina_epoxi_transparente_manualidades_recubrimientos_d7.jpg19956229702769727808431844339643654446075186052875/Resin Drop/Arts & Crafts/Arts & Crafts/Tools & Accessories/Resin2024-04-10T06:58:21+0000
