Glossy Textile Vinyl - EasyPatterns Plus from Siser

Heat transfer vinyl with pre-printed patterns. Ideal for customising T-shirts, caps, tote bags...

  • Polyurethane with a thickness of 90 µ and glossy finish
  • Suitable for fabrics: polyester, cotton, cotton-polyester blends, and spandex

More information

Availability:
Shown on each product
Reward Points
Get free € to redeem on your next order by buying these products. Discover the Brildor Loyalty Program Get free € to redeem on your next order by buying these products. Discover the Brildor Loyalty Program

More information about the Glossy Textile Vinyl - EasyPatterns Plus from Siser

 

INDEX

> Description

> Things to keep in mind

> Certificates

> Technical characteristics

> Plotter cutting parameters

> Transfer parameters

> Application instructions

> Washing recommendations

> Storage recommendations

> Technical data sheet

> Measurements roll of 10 meters

 

DESCRIPTION

  • Heat transfer vinyl with a variety of pre-printed patterns. Ready to be cut and applied to garments or any other textile
  • High adaptability to elastic fabrics, without cracking or losing adhesion
  • The backing or liner is a self-adhesive PET (polyester) film that acts as a carrier
  • Can be cut with a laser and plotter. The laser only cuts the top layer without affecting the lower layers

 

THINGS TO KEEP IN MIND

  • Does not have Blockout: on dark polyester textiles, the base colour may migrate and affect the vinyl's tone during transfer

 

CERTIFICATES

  • VeganOK: guarantees that the raw materials used are not of animal origin and are cruelty-free
  • REACH n° 1907/2006/EU: ensures the absence of hazardous chemicals
  • Oeko-Tex Standard 100 Class I: confirms that it is suitable for textiles in contact with the skin of babies and young children up to 3 years old

 

TECHNICAL CHARACTERISTICS

Vinyl Polyurethane
Thickness (µ) 90
Backing or liner Adhesive polyester
Fabrics Polyester, cotton, polyester-cotton blends, and spandex
(without water-repellent coating)
Plotter cutting blade 45º
Laser cutting Yes
Layerable(*) No
Peeling Hot

(*) Allows another layer of vinyl to be applied on top to create composite multicolour designs

 

PLOTTER CUTTING PARAMETERS

  • Cutting blade: 45º
  • Pressure: 50 gf
  • Speed: 25 cm/second

 

TRANSFER PARAMETERS

  • Temperature: 155 ºC
  • Time: 15 seconds
  • Pressure: 2.5/3.5 bar [medium pressure]

 

APPLICATION INSTRUCTIONS

  • Cut the design in mirror mode with a cutting plotter
  • Weed the excess vinyl (weeding operation)
  • Heat the press to 155 ºC
  • Place the garment on the press and pre-press for 20 seconds to remove wrinkles and moisture from the textile
  • Place the vinyl on the garment and protective paper over the vinyl
  • Press with medium-high pressure for 15 seconds
  • Peel the liner hot
  • Press again for 10 seconds with the same parameters

 

WASHING RECOMMENDATIONS

  • Wait 24 hours before the first wash
  • Hand wash or machine wash at a maximum temperature of 40º
  • Do not bleach or dry clean
  • Air dry or use a tumble dryer with a cotton cycle
  • Iron at low temperature
  • If ironing, it is better to turn the garment inside out

 

STORAGE RECOMMENDATIONS

  • Store in dust-free areas without direct exposure to sunlight
  • Storage temperature: between 18 and 26 ºC
  • Shelf life: 2 years

 

TECHNICAL DATA SHEET

Siser EasyPatterns Plus Technical Data Sheet (.pdf - 0.38 MB)

 

MEASUREMENTS ROLL OF 10 METERS

Roll 30 cm x 10 m
Inner mandrel diameter (cm) 7,5
Outer diameter (cm) 9,58
Box (cm) 32,5 x 15,5 x 15,5
More Information
Ref. 952871
Write Your Own Review
Post your question