Versatile: allows print mugs from 11 to 15 oz, tumblers, drums and similar up to 30 oz
Compact and lightweight design: with a heating element fully integrated in the housing
Automatic pressure adjustment: the heating element adapts to the diameter of the item with the right pressure without the need for manual adjustment
Programmable temperature and time: easily from the control panel. Adjust the temperature range between 100 and 200 °C
Automatic opening: at the end of the timer, the press beeps and opens
Repeats preset settings: memorises the last settings parameters and allows them to be used for the next ironing
Automatic switch-off: after 15 minutes of inactivity. Before switching off, it will beep and the lights will flash
Emergency stop function: press any button to interrupt the ironing process
CE certification: guarantees that this appliance press complies with the technical requirements of the European Union
Warranty: 3 years for manufacturing defects
THINGS TO KEEP IN MIND
If the object to be sublimated has a smaller diameter than the resistance of the plate allows, you can use silicone sheets to increase the diameter. You can find them in Related Products
If you want to personalise the entire surface of the cylindrical object, it is recommended to sublimate in 2 parts. After the first ironing, turn the item slightly and iron again 30 seconds. This ensures complete and uniform personalisation
This iron has a closed casing structure and cannot be manipulated by the user. For this reason, there are no replacement heating elements available
WHAT DOES THE LOKLIK AUTOMATIC IRON INCLUDE?
1
Pair of gloves heat protectors
1
Roll of thermal adhesive tape
1
User manual
1
Control panel warranty
CONTROL PANEL
Power button: ON/OFF, after power on the button will flash with white light
Temperature button: press to adjust the value. Press and hold for 2 seconds to change from ºC to ºF and vice versa
Time button: press to adjust the value
+/- buttons: allows you to increase and decrease the temperature and time values. Short press for intervals of 5 and long press for intervals of 10
Start button (LokLik icon): will turn green when the iron reaches the set ironing temperature. Pressing it activates the ironing
Connect the press to the mains and switch it on by pressing the ON/OFF button
Set the desired temperature and time settings
When the red light turns green, insert the object
Once entered, press the START button and the press will close automatically
The transfer is finished when the timer expires and you hear a beep
The press will open automatically when the ironing time has elapsed
Remove the personalised object with the help of gloves and let it cool down
CAUTIONS
Do not place products that are not suitable
The item must be clean without any liquid, oil or dust
Use on a stable, flat, heat-resistant surface
Avoid touching the heating element when it is hot
Switch off the machine when not in use
When there are beeps and E1 or E2 appears on the LED screen, cut off the voltage immediately and restart
TECHNICAL DATA
Type of press
Automatic / Cups
Model
Auto Tumbler Heat Press HPT01
Voltage (V | HZ)
220 | 50
Power (W)
550
Temperature (ºC | °F)
100-200 | 210-390
Time (s)
1-600
Length of cable (m)
1,8
Compatible diameter (cm)
Ø7.5-Ø8.5
Max. compatible length (cm)
24 cm
Size press (cm)
32.8 x 27.8 x 16
Packaging (cm)
39 x 33.5 x 20.5 cm
Net weight (kg)
4.3
Gross weight (kg)
5
DIMENSIONS OF THE RESISTANCE
Indicative measurements indicated by the manufacturer. It is recommended to test the resistance with the product to be customised before starting production.
https://www.brildor.com/en/loklik-auto-mug-tumbler-heat-press51820LokLik Auto Mug & Tumbler Heat Press<p><a name="saber-mas"></a></p>
<h2>More information about the LokLik Auto Mug & Tumbler Heat Press</h2>
<p> </p>
<p><strong>INDEX</strong></p>
<p>> <a href="#saber-mas1">Performance</a></p>
<p>> <a href="#saber-mas2">Things to keep in mind</a></p>
<p>> <a href="#saber-mas8">What is included in the auto heat press LokLik?</a></p>
<p>> <a href="#saber-mas6">Control panel</a></p>
<p>> <a href="#saber-mas3">Manual</a></p>
<p>><a href="#saber-mas7"> Instructions for use</a></p>
<p>> <a href="#saber-mas4">Precautions</a></p>
<p>> <a href="#saber-mas5">Technical data</a></p>
<p>> <a href="#saber-mas9">Dimensions of the resistance</a></p>
<p> </p>
<p class="enlace"><a id="saber-mas1"></a> </p>
<p><strong>PERFORMANCE</strong></p>
<ul>
<li><strong>Versatile: </strong>allows print mugs from <span class="azul-negrita">11</span> to <span class="azul-negrita">15 oz</span>, tumblers, drums and similar up to <span class="azul-negrita">30</span> <span class="azul-negrita"> oz</span></li>
<li><strong>Compact and lightweight design: </strong>with a heating element fully integrated in the housing</li>
<li><strong>Automatic pressure adjustment:</strong> the heating element adapts to the diameter of the item with the right pressure without the need for manual adjustment</li>
<li><strong>Programmable temperature and time:</strong> easily from the control panel. Adjust the temperature range between<span class="azul-negrita"> 100</span> and <span class="azul-negrita">200 °C</span></li>
<li><strong>Automatic opening:</strong> at the end of the timer, the press beeps and opens</li>
<li><strong>Repeats preset settings: </strong>memorises the last settings parameters and allows them to be used for the next ironing</li>
<li><strong>Automatic switch-off:</strong> after <span class="azul-negrita">15 minutes</span> of inactivity. Before switching off, it will beep and the lights will flash</li>
<li><strong>Emergency stop function:</strong> press any button to interrupt the ironing process</li>
<li><strong>CE certification: </strong>guarantees that this appliance press complies with the technical requirements of the European Union</li>
<li><strong>Warranty:</strong> 3 years for manufacturing defects</li>
</ul>
<p> </p>
<p class="enlace"><a id="saber-mas2"></a> </p>
<p><strong>THINGS TO KEEP IN MIND</strong></p>
<ul>
<li>If the object to be sublimated has a smaller diameter than the resistance of the plate allows, you can use silicone sheets to increase the diameter. You can find them in <strong>Related Products</strong></li>
<li>If you want to personalise the entire surface of the cylindrical object, it is recommended to sublimate in 2 parts. After the first ironing, turn the item slightly and iron again<span class="azul-negrita"> 30 seconds</span>. This ensures complete and uniform personalisation</li>
<li>This iron has a closed casing structure and cannot be manipulated by the user. For this reason, there are no replacement heating elements available</li>
</ul>
<p> </p>
<p class="enlace"><a id="saber-mas8"></a> </p>
<p><strong>WHAT DOES THE LOKLIK AUTOMATIC IRON INCLUDE?</strong></p>
<table>
<tbody>
<tr>
<td><span class="azul-negrita">1</span></td>
<td>Pair of gloves heat protectors</td>
</tr>
<tr>
<td><span class="azul-negrita">1</span></td>
<td>Roll of thermal adhesive tape</td>
</tr>
<tr>
<td><span class="azul-negrita">1</span></td>
<td>User manual</td>
</tr>
<tr>
<td><span class="azul-negrita">1</span></td>
<td>Control panel warranty</td>
</tr>
</tbody>
</table>
<p> </p>
<p class="enlace"><a id="saber-mas6"></a> </p>
<p><strong>CONTROL PANEL</strong></p>
<ul>
<li><strong>Power button: </strong>ON/OFF, after power on the button will flash with white light</li>
<li><strong>Temperature button:</strong> press to adjust the value. Press and hold for <span class="azul-negrita">2 seconds</span> to change from <span class="azul-negrita">ºC</span> to <span class="azul-negrita">ºF</span> and vice versa</li>
<li><strong>Time button:</strong> press to adjust the value</li>
<li><strong>+/- buttons:</strong> allows you to increase and decrease the temperature and time values. Short press for intervals of 5 and long press for intervals of 10</li>
<li><strong>Start button (LokLik icon):</strong> will turn green when the iron reaches the set ironing temperature. Pressing it activates the ironing</li>
</ul>
<p> </p>
<p class="enlace"><a id="saber-mas3"></a> </p>
<p><strong>MANUAL</strong></p>
<p><a href="https://tinyurl.com/2y9ap35j" target="_blank" rel="noopener">User Manual Auto Tumbler Heat Press (.pdf - 7,9 MB)</a></p>
<p> </p>
<p class="enlace"><a id="saber-mas7"></a> </p>
<p><strong>INSTRUCTIONS FOR USE</strong></p>
<ul>
<li>Connect the press to the mains and switch it on by pressing the ON/OFF button</li>
<li>Set the desired temperature and time settings</li>
<li>When the red light turns green, insert the object</li>
<li>Once entered, press the START button and the press will close automatically</li>
<li>The transfer is finished when the timer expires and you hear a beep</li>
<li>The press will open automatically when the ironing time has elapsed</li>
<li>Remove the personalised object with the help of gloves and let it cool down</li>
</ul>
<p> </p>
<p class="enlace"><a id="saber-mas4"></a> </p>
<p><strong>CAUTIONS</strong></p>
<ul>
<li>Do not place products that are not suitable</li>
<li>The item must be clean without any liquid, oil or dust</li>
<li>Use on a stable, flat, heat-resistant surface</li>
<li>Avoid touching the heating element when it is hot</li>
<li>Switch off the machine when not in use</li>
<li>When there are beeps and E1 or E2 appears on the LED screen, cut off the voltage immediately and restart</li>
</ul>
<p> </p>
<p class="enlace"><a id="saber-mas5"></a> </p>
<p><strong>TECHNICAL DATA</strong></p>
<table>
<tbody>
<tr>
<td><strong>Type of press</strong></td>
<td>Automatic / Cups</td>
</tr>
<tr>
<td><strong>Model</strong></td>
<td>Auto Tumbler Heat Press HPT01</td>
</tr>
<tr>
<td><strong>Voltage (V | HZ)</strong></td>
<td><span class="azul-negrita">220 </span>| <span class="azul-negrita">50</span></td>
</tr>
<tr>
<td><strong>Power (W)</strong></td>
<td><span class="azul-negrita">550</span></td>
</tr>
<tr>
<td><strong>Temperature (ºC | °F)</strong></td>
<td><span class="azul-negrita">100-200 </span>| <span class="azul-negrita">210-390 </span></td>
</tr>
<tr>
<td><strong>Time (s)</strong></td>
<td><span class="azul-negrita">1-600</span></td>
</tr>
<tr>
<td><strong>Length of cable (m)</strong></td>
<td><span class="azul-negrita">1,8</span></td>
</tr>
<tr>
<td><strong>Compatible diameter (cm)</strong></td>
<td><span class="azul-negrita">Ø7.5-Ø8.5</span></td>
</tr>
<tr>
<td><strong>Max. compatible length (cm)</strong></td>
<td><span class="azul-negrita">24 cm</span></td>
</tr>
<tr>
<td><strong>Size press (cm)</strong></td>
<td><span class="azul-negrita">32.8 x 27.8 x 16</span></td>
</tr>
<tr>
<td><strong>Packaging (cm)</strong></td>
<td><span class="azul-negrita">39 x 33.5 x 20.5 cm</span></td>
</tr>
<tr>
<td><strong>Net weight (kg)</strong></td>
<td><span class="azul-negrita">4.3</span></td>
</tr>
<tr>
<td><strong>Gross weight (kg)</strong></td>
<td><span class="azul-negrita">5</span></td>
</tr>
</tbody>
</table>
<p> </p>
<p class="enlace"><a id="saber-mas9"></a> </p>
<p><strong>DIMENSIONS OF THE RESISTANCE</strong></p>
<p><strong>Indicative measurements</strong> indicated by the manufacturer. It is recommended to test the resistance with the product to be customised before starting production.</p>
<p><img src="{{media url="wysiwyg/Plancha/medidas-resistencia-plancha-automatica-loklik-d1.jpg"}}" alt="Medidas resistencia" width="500" height="217"></p>
<table>
<tbody>
<tr>
<td style="text-align: center;">
<p><strong>Shape<br></strong></p>
</td>
<td style="text-align: center;">
<p><strong>A <br></strong><strong>(cm)</strong><strong><br></strong></p>
</td>
<td style="text-align: center;">
<p><strong>B <br></strong><strong>(cm)</strong><strong><br></strong></p>
</td>
</tr>
<tr>
<td style="text-align: center;">
<p>Cylindrical</p>
</td>
<td style="text-align: center;">
<p><span class="azul-negrita"><strong>22.5</strong></span></p>
</td>
<td style="text-align: center;">
<p><span class="azul-negrita"><strong>24</strong></span></p>
</td>
</tr>
</tbody>
</table>
<p> </p>https://www.brildor.com/media/catalog/product/p/l/plancha-automatica-tazas-botellas-loklik-d1.jpg149.96instock166.62149.961016.66000https://www.brildor.com/media/catalog/product/p/l/plancha-automatica-tazas-botellas-loklik-d1.jpg229204283943725501385118251693/Heat Presses/Heat Presses/Heat Presses & Ovens/Mug Heat Presses/Heat Presses/Heat Presses & Ovens/Offers2024-04-03T07:04:59+0000