European-made PLA filament for 3D printers, available in pastel and pearl colours. Rigid and resistant structure that helps extrusion and allows the creation of 3D objects with no deformation.
More information about the PLA Soorim filaments in pastel and pearl colours
Ideal for creating 3D objects such as figures, sculptures, jewellery, letters, decorative names, flower pots and much more.
99% biodegradable. Material of biological origin, environmentally friendly. Produced from fibres and starches harvested in fields grown in the Valencian Community (Spain).
Suitable for food consumption or packaging and toy production. Except for the black filament.
High-performance easy-to-print material, excellent interlayer adhesion and mechanical strength with low shrinkage.
Intense, shiny colours with a silky finish, similar to satin.
Free of toxic elements, strong odours and smoke.
Delivered in a cardboard box, shrink-wrapped with hygroscopic insulation to prevent moisture absorption.
THINGS TO KEEP IN MIND
The pearlescent finish of the filament is only noticeable in the final 3D printing result.
TECHNICAL DETAILS
Thickness
1.75 mm
Tolerance
0.05 mm
Density
1.24 g/cm3
Print temperature
210ºC- 230ºC
Print speed
40-50 mm/s
Hot bed temperature
40ºC
Tensile strength
45 MPa
Tensile modulus
3500 MPa
Elongation at break
≤5%
Nozzle diameter
0.4/0.6 mm
RECOMMENDATIONS FOR USE
Use a cooling fan during printing. It is important to turn it on after the first layers to avoid affecting adhesion.
STORAGE & PRESERVATION
Filaments tend to absorb moisture from the environment, leading to problems during printing or finishing touches.
Moisture may cause the filament to degrade, clogging the extruder and varying its physical and mechanical properties.
The filament needs to be stored and dried correctly in order to keep it in good condition.
The filament must be stored in airtight containers, preferably vacuum packed. You can use zip bags with silica gel beads, vacuum sealer bags or vacuum seal food containers.
Some techniques to remove moisture are:
Conventional methods such as drying the filament in a home oven or a food dehydrator. Drying at low temperatures for long periods of time.
Or the professional way by using a filament dryer.
If stored correctly whilst maintaining the tightness of the packaging, the product can be used for 24 months after delivery.
https://www.brildor.com/en/pla-soorim-filament-pastel-pearl-colours43568PLA Soorim Filament - Pastel and Pearl Colours<p><a name="know-more"></a></p>
<h2>More information about the PLA Soorim filaments in pastel and pearl colours</h2>
<ul>
<li>Ideal for creating 3D objects such as figures, sculptures, jewellery, letters, decorative names, flower pots and much more.</li>
<li>99% biodegradable. Material of biological origin, environmentally friendly. Produced from fibres and starches harvested in fields grown in the Valencian Community (Spain).</li>
<li>Suitable for food consumption or packaging and toy production. Except for the black filament.</li>
<li>High-performance easy-to-print material, excellent interlayer adhesion and mechanical strength with low shrinkage.</li>
<li>Excellent adhesion, preventing noticeable layer overlapping.</li>
<li>Elastic, shock and impact resistance.</li>
<li>Intense, shiny colours with a silky finish, similar to satin.</li>
<li>Free of toxic elements, strong odours and smoke.</li>
<li>Delivered in a cardboard box, shrink-wrapped with hygroscopic insulation to prevent moisture absorption.</li>
</ul>
<p><strong>THINGS TO KEEP IN MIND</strong></p>
<ul>
<li>The pearlescent finish of the filament is only noticeable in the final 3D printing result.</li>
</ul>
<p><strong>TECHNICAL DETAILS</strong></p>
<table>
<tbody>
<tr>
<td>Thickness</td>
<td><span class="azul-negrita">1.75 mm</span></td>
</tr>
<tr>
<td>Tolerance</td>
<td><span class="azul-negrita">0.05 mm</span></td>
</tr>
<tr>
<td>Density</td>
<td><span class="azul-negrita">1.24 g/cm<sup>3</sup></span></td>
</tr>
<tr>
<td>Print temperature</td>
<td><span class="azul-negrita">210ºC</span>- <span class="azul-negrita">230ºC</span></td>
</tr>
<tr>
<td>Print speed</td>
<td><span class="azul-negrita">40-50 mm/s<br></span></td>
</tr>
<tr>
<td>Hot bed temperature</td>
<td><span class="azul-negrita">40ºC</span></td>
</tr>
<tr>
<td>Tensile strength</td>
<td><span class="azul-negrita">45 MPa</span></td>
</tr>
<tr>
<td>Tensile modulus</td>
<td><span class="azul-negrita">3500 MPa</span></td>
</tr>
<tr>
<td>Elongation at break</td>
<td><span class="azul-negrita">≤5%</span></td>
</tr>
<tr>
<td>Nozzle diameter</td>
<td><span class="azul-negrita">0.4/0.6 mm</span></td>
</tr>
</tbody>
</table>
<p><strong>RECOMMENDATIONS FOR USE</strong></p>
<ul>
<li>Use a cooling fan during printing. It is important to turn it on after the first layers to avoid affecting adhesion.</li>
</ul>
<p><strong>STORAGE & PRESERVATION</strong></p>
<ul>
<li>Filaments tend to absorb moisture from the environment, leading to problems during printing or finishing touches.</li>
<li>Moisture may cause the filament to degrade, clogging the extruder and varying its physical and mechanical properties.</li>
<li>The filament needs to be stored and dried correctly in order to keep it in good condition.</li>
<li>The filament must be stored in airtight containers, preferably vacuum packed. You can use zip bags with silica gel beads, vacuum sealer bags or vacuum seal food containers.</li>
<li>Some techniques to remove moisture are:</li>
<ul>
<li>Conventional methods such as drying the filament in a home oven or a food dehydrator. Drying at low temperatures for long periods of time.</li>
<li>Or the professional way by using a filament dryer.</li>
</ul>
<li>If stored correctly whilst maintaining the tightness of the packaging, the product can be used for 24 months after delivery.</li>
</ul>
<p><strong>DIMENSIONS (APPROX.)</strong></p>
<table>
<tbody>
<tr>
<td>Spool</td>
<td><span class="azul-negrita">Ø20 x 5.5 cm</span></td>
</tr>
<tr>
<td>Packaging</td>
<td><span class="azul-negrita">22 x 7.5 x 20.5 cm</span></td>
</tr>
<tr>
<td>Filament weight</td>
<td><span class="azul-negrita">750 g<br></span></td>
</tr>
<tr>
<td>Weight with spool</td>
<td><span class="azul-negrita">950 g</span></td>
</tr>
</tbody>
</table>https://www.brildor.com/media/catalog/product/f/i/filamento-pla-soorim-colores-pastel-perlados.jpg13.49instock013.49000https://www.brildor.com/media/catalog/product/f/i/filamento-pla-soorim-colores-pastel-perlados.jpg2750827545276264355343598/3D Printers/3D Printers/Filaments2022-02-03T09:28:28+0000
Cómo se hace el
