Rectangular Badges - 50x90mm

Components of each 50 x 90 mm rectangular badge

PIN - REF. 036439 & 036099

The badge includes a safety pin to attach it to clothing. Sale unit: 10 and 100-badge bags.

• 1 protective plastic film (Mylar).
• 1 metal plate to personalise (front).
• 1 metal plate with a pin (back).

MAGNET - REF. 036438 & 036103

The badge includes a magnet that allows it to stick to any metal surface. Sale unit: 10 and 100-badge bags.

• 1 protective plastic film (Mylar).
• 1 metal plate to personalise (front).
• 1 circular and flexible black magnet, with an adhesive on its back.
• 1 metal plate on which the magnet has to be pasted (back).

MIRROR - REF. 036436 & 036105

The badge has a mirror on its back. Sale unit: 10 and 100-badge bags.

• 1 protective plastic film (Mylar).
• 1 metal plate to personalise (front).
• 1 round cardboard shim.
• 1 mirror + 1 round metal collet (back).

BOTTLE OPENER MAGNET - REF. 036437 & 036107

The back of the badge has a bottle opener with a built-in magnet to stick it to metal surfaces. Sale unit: 10 and 50-badge bags.

• 1 protective plastic film (Mylar).
• 1 metal plate to personalise (front).
• 1 metal bottle opener with a magnet (back).

How to personalise 50 x 90 mm rectangular badges?

STEP 1: PRINT THE DESIGN

• Design the motif that you want to place on the badge. Use images, photos, logos... and a lot of creativity.
• Prepare a template according to the size and shape of the badge. Remember that the template must have an additional border, on the outside, to fold and attach the design to the back of the badge.
• Print your design on paper, with your usual printer. It is recommended to use paper sheets with a 100-110 g/m2 thickness.

Download the template to help you print your special badges en eps, psd or pdf format.

STEP 2: TRIM THE DESIGN

• Cut the printed paper on the outermost edge. You may use scissors or a utility knife (cutter). It is convenient to use a die cutting machine or a plotter to be able to cut several designs at the same time. It will help you gain precision and speed, achieving a straight, clean, and homogeneous cut. (see in Related Products).
  

STEP 3: ASSEMBLE THE BADGES

• Prepare the badge making machine.
• Set up the 50 x 90 mm rectangular mould on the machine.
• Place the front of the badge on the mould's Part A, with the sharp metal edge down.
• On this plate, place the design that you previously trimmed, and cover it with the protective plastic film.
• Rotate the base until the Upper Part aligns with Part A.
• Hold the machine with one hand and push the lever down with the other one. Apply pressure and pull the lever up. The front plate will remain on the Upper Part.
• Place the back of the badge on Part B, with the sharp metal edge up. Try to align the plate with the positioning pin to ensure its correct orientation. In the case of mirror badges, you must first place the frame with the metal edge up, then the mirror face down, and finally the cardboard shim.
• Rotate the base of the machine until the Upper Part aligns with Part B.
• Hold the machine with one hand and push the lever down with the other one. Apply pressure and pull it back up.
• Rotate the base of the machine again and remove the badge.
• In the case of the magnet model, you must also stick the latter to the back of the badge.