Special Transfer Paper for Rhinestones

More information about the Special Transfer Paper for Rhinestones

INDEX

> Description

> Recommendations

> Instructions for use

> Things to keep in mind

> Measurements

DESCRIPTION

• Conveyor tape with water-based acrylic adhesive. Does not damage the fabric material when attaching stones
• Suitable for application with a transfer press
• Durable and flexible
• Perfectly adapts to the shape of the surface to be customised

RECOMMENDATIONS

• It is recommended to create templates with the designs to be transferred to facilitate application. Find all necessary materials in the Rhinestone Transfer Starter Kit

INSTRUCTIONS FOR USE

1. Use a plotter to cut the vinyl with the chosen design and weed to reveal the shape to be transferred (Optional)
2. Place the stones on the template using a foam brush or tweezers
3. Cut a piece of the embossed transfer paper, remove the liner, and place the adhesive side down on the stones
4. Use a spatula to secure the stones
5. Turn the vinyl with the transfer paper over and press again with more pressure to ensure the adhesive fully adheres to the stones
6. Carefully peel off the transfer paper with the design, ensuring no stones come loose
7. Position the design so that the adhesive side of the stones is on the garment
8. Press with protective paper
9. Allow to cool before removing the transfer paper
10. Perform a final press for 10 seconds to secure the stones

THINGS TO KEEP IN MIND

• If you are not applying the design with the transfer paper immediately, place it back on the liner and store it

MEASUREMENTS