Search
Starting at:
€7.16
/ Each Unit
Sublimable Black Leatherette Wallet 8x12
Ref.
035765
Portfolio printable using the technique of dye sublimation printing.
- Black synthetic leather and flap from whiteleather, suitable for sublimation
- Includes coin pouch, cash compartment, 2 credit card slots, 3 additional compartments and 1 compartment with window
- Snap-rivet flap with snap rivet
- Print area: 7 x 12 cm
Availability:
Immediate: 58 units
Please, give us an estimate of the quantity you need:
As a Premium Brildor Member, for each unit you buy, you will accumulate {{POINTS}}
to redeem on your next order. Discover the Brildor Loyalty Program.
For each unit you buy, you will accumulate {{POINTS}} to redeem
on your next order. Discover the Brildor Loyalty Program.
Related Products
More information about the Sublimable Black Leatherette Wallet 8x12
INDEX
> Recommended instructions and parameters for sublimation printing
DESCRIPTION
- External coin purse with 2 compartments and zip closure. Located in the back of the wallet
- It has 3 sections that unfold when opened. They are composed of:
- Wallet
- 2 slots and 3 additional compartments for cards, notescards, ID cards...
- 1 compartment with window clear for a photo or ID card
THINGS TO KEEP IN MIND
- Leave the non-sublimatable part of the front flap out of the plate. If this is not possible, cover it with heat tape, a piece of thick paper or cardboard to prevent it from getting dirty or damaged during printing
- Make sure the heat seal tape does not touch the leatherette as you may tear it off when peeling it off
DIMENSIONS
| Closed (cm) | 9 x 12 x 3 |
| Open (cm) | 24 x 12 |
| Purse (cm) | 12 x 7 |
| Wallet (cm) |
23 x 10,5 |
| Compartment clear (cm) |
5,5 x 10 |
| Print area (cm) | 7 x 12 |
| Weight (g) | 104 |
RECOMMENDED INSTRUCTIONS AND PARAMETERS FOR SUBLIMATION PRINTING
Parameters indicated as for guidance only. It is recommended to carry out preliminary tests in order to make the necessary adjustments before starting production.
- Print the design in mode mirror
- Preheat the press to 200 °C
- Protect the non-sublimatable parts of the flap with paper and keep them out of the plate
- Place the flap of the wallet on the base of the iron and the printed part of the paper on the flap
- Make sure that the thermal adhesive tape does not touch the leather-like fabric of the wallet because you could tear it off when you peel it off
- Close the iron with medium pressure for 40-45 seconds
- With the help of a protective glove, remove the wallet
- Carefully remove the paper from the flap
| Ref. | 035765 |
|---|---|
| Gross Weight (kg) | 0.104 |
| Billable Weight (kg) | 0.1140 |
| Dimensions (mm) | 90 x 120 |
| Print area (mm) | 70 x 120 |
| Thickness (mm) | 30 |
| Colour | White, Black |
| Surface material | Faux leather |
| Items | Wallets, Coin wallets |
| Composition | Synthetic leather |
| Accessory details | Pocket, Zip, Foldable |
| Marking techniques | Dye sublimation |
Write Your Own Review
Post your question