Search
Starting at:
€2.54
/ Each Unit
Sublimable Car Headrest Cover - Pack 2 pcs
Ref.
036504
Polyester cover for car headrests, you can personalise using dye sublimation printing.
- Print area: 25.5 x 27.5 cm
Availability:
Immediate: 0 units
Expected entries:
26/12/24: 100 units
Expected entries:
26/12/24: 100 units
Please, give us an estimate of the quantity you need:
As a Premium Brildor Member, for each unit you buy, you will accumulate {{POINTS}}
to redeem on your next order. Discover the Brildor Loyalty Program.
For each unit you buy, you will accumulate {{POINTS}} to redeem
on your next order. Discover the Brildor Loyalty Program.
€3.39
VAT not included
/ Each Unit
- Buy 5 for €3.22 each
- Buy 25 for €2.97 each
- Buy 100 for €2.54 each
Please, give us an estimate of the quantity you need:
We'll let you know as soon as it's available.
This is a non-binding service.
This is a non-binding service.
Related Products
More information about the Sublimable Car Headrest Cover
INDEX
> Recommended instructions and parameters for sublimation printing
DESCRIPTION
- Ideal for bus fleets, taxis or any company vehicle
- Sewn and stretchable fabric that fits any standard car seat headrest
- Can also be personalised with other techniques such as DTF, DTG, transfer, embroidery, rhinestones, HTV and screen printing
THINGS TO KEEP IN MIND
- We recommend partial sublimation of the cover. If the sublimation is complete, the seam area may remain white when stretched during placement
DIMENSIONS
| Cover (cm) | 25.5 x 27.5 |
| Thickness (mm) | 4 |
| Printable area (cm) | 25.5 x 27.5 |
| Weight (g) | 24 |
WASHING RECOMMENDATIONS
- Machine washable at a maximum temperature of 40 ºC
- Do not bleach or dry clean
- Air dry preferably
RECOMMENDED INSTRUCTIONS AND PARAMETERS FOR SUBLIMATION PRINTING
The instructions detailed below correspond to complete sublimation. Leave the seam area out for partial sublimation.
- Print the design in mirror image
- Preheat the press to 190 ºC
- Place a piece of paper or thin cardboard inside the cover to prevent the ink from transferring from one side to the other during pressing
- Place the cover on the lower platen of the press and the paper's printed side against the cover
- Close the press with medium-high pressure for 35 seconds
- Remove the newly printed cover using a protective glove
- Peel off the paper carefully
RELATED POSTS
| Ref. | 036504 |
|---|---|
| Net Weight (kg) | 0.060 |
| Gross Weight (kg) | 0.060 |
| Billable Weight (kg) | 0.0660 |
| Dimensions (mm) | 255 x 275 |
| Print area (mm) | 255 x 275 |
| Thickness (mm) | 14 |
| Colour | White |
| Composition | Polyester |
| Marking techniques | Dye sublimation, DTF, Transfer, Screen printing, HTV, DTG, Embroidery, Rhinestones |
Write Your Own Review
Post your question