Clear acrylic sheet inside, making the passport visible and protected
Can also be personalised using other techniques such as laser engraving, UV direct printing, vinyl, transfer and DTF
DIMENSIONS
Flap (cm)
8.8 x 14.5
Visible passport area (cm)
6.4 x 12
Closed cover (cm)
10 x 14.5
Open cover (cm)
14.5 x 20
Print area (cm)
8.8 x 14.5
Thickness (cm)
1
Weight (g)
62
RECOMMENDED INSTRUCTIONS AND PARAMETERS FOR SUBLIMATION PRINTING
Parameters provided as a guideline. It is recommended to carry out preliminary tests in order to make the necessary adjustments before starting production.
Print the design in mirror image
Preheat the press to 180ºC
Place the cover on the lower platen of the press, and the paper's printed side against it. Fix them with heat-resistant tape
Close the press at medium pressure for 60 seconds
Remove the newly printed cover using a protective glove
https://www.brildor.com/en/sublimable-leatherette-passport-covers51290Sublimable Leatherette Passport Covers<p><a name="know-more"></a></p>
<h2>More information about the Sublimable Leatherette Passport Covers</h2>
<p> </p>
<p><strong>INDEX</strong></p>
<p>> <a href="#know-more1">Description</a></p>
<p>> <a href="#know-more3">Dimensions</a></p>
<p>> <a href="#know-more4">Recommended instructions and parameters for sublimation printing</a></p>
<p> </p>
<p class="enlace"><a id="know-more1"></a> </p>
<p><strong>DESCRIPTION</strong></p>
<ul>
<li>Passport holders made from synthetic leather</li>
<li>Ideal for protecting passports when travelling</li>
<li>Black back</li>
<li>Rounded corners</li>
<li>Clear acrylic sheet inside, making the passport visible and protected</li>
<li>Can also be personalised using other techniques such as <span class="azul-brildor-negrita">laser engraving</span>, <span class="azul-brildor-negrita">UV direct printing</span>, <span class="azul-brildor-negrita">vinyl</span>, <span class="azul-brildor-negrita">transfer</span> and <span class="azul-brildor-negrita">DTF</span></li>
</ul>
<p> </p>
<p class="enlace"><a id="know-more3"></a> </p>
<p><strong>DIMENSIONS<br></strong></p>
<table >
<tbody>
<tr>
<td ><strong>Flap (cm)<br></strong></td>
<td ><span class="azul-negrita">8.8 x 14.5<br></span></td>
</tr>
<tr>
<td ><strong>Visible passport area (cm)<br></strong></td>
<td ><span class="azul-negrita">6.4 x 12<br></span></td>
</tr>
<tr>
<td ><strong>Closed cover (cm)<br></strong></td>
<td ><span class="azul-negrita">10 x 14.5<br></span></td>
</tr>
<tr>
<td ><strong>Open cover (cm)<br></strong></td>
<td ><span class="azul-negrita">14.5 x 20<br></span></td>
</tr>
<tr>
<td ><strong>Print area (cm)</strong></td>
<td ><span class="azul-negrita">8.8 x 14.5</span></td>
</tr>
<tr>
<td ><strong>Thickness (cm)</strong></td>
<td ><span class="azul-negrita">1</span></td>
</tr>
<tr>
<td ><strong>Weight (g)</strong></td>
<td ><span class="azul-negrita">62</span></td>
</tr>
</tbody>
</table>
<p class="enlace"> </p>
<p class="enlace"><a id="know-more4"></a> </p>
<p><strong>RECOMMENDED INSTRUCTIONS AND PARAMETERS FOR SUBLIMATION PRINTING</strong></p>
<p>Parameters provided as a guideline. It is recommended to carry out preliminary tests in order to make the necessary adjustments before starting production.</p>
<ul>
<li>Print the design in <strong>mirror image</strong></li>
<li>Preheat the press to <span class="azul-negrita">180ºC</span></li>
<li>Place the cover on the lower platen of the press, and the paper's printed side against it. Fix them with heat-resistant tape</li>
<li>Close the press at <strong>medium pressure</strong> for <span class="azul-negrita">60 seconds</span></li>
<li>Remove the newly printed cover using a protective glove</li>
<li>Peel off the paper carefully</li>
</ul>https://www.brildor.com/media/catalog/product/f/u/fundas-pasaporte-polipiel-sublimable-d5_1.jpg4.95instock04.95000https://www.brildor.com/media/catalog/product/f/u/fundas-pasaporte-polipiel-sublimable-d5_1.jpg232204964051258/Blanks/Blanks/Travel/Blanks/Viajes2023-12-19T15:18:06+0000