Perfect for your catalogue of customisable products for events, special celebrations, souvenirs...
Suitable for customisation with a sublimation oven using clamps, silicone sheets, or shrink bags (See Related Products)
Can also be customised using a transfer press with a special accessory for hip flasks
Interior made of brushed silver 304 stainless steel. Suitable for food consumption
High-quality, corrosion-resistant material
Slightly curved shape. Flat base
Metal cap with an inner silicone membrane to seal the flask hermetically
Presented in a white cardboard box
Can also be customised using other techniques such as screen printing, DTF, adhesive vinyl, transfer, direct UV printing, or laser engraving
THINGS TO KEEP IN MIND
The white flask is slightly smaller than the silver one. Its cap is also different
If using shrink bags, protect the parts of the flask that will not be customised with protective paper. This will prevent the bag from coming into direct contact with the metal and sticking to it
Dishwasher safe at maximum temperatures of 60 °C. If the design has been applied with adhesive vinyl or transfer paper, dishwasher use is not recommended
TIPS AND ADVICE
Stamp with logos for merchandising. Use laser engraving to add contact information or a corporate slogan
Sublimate a map or city coordinates, and use laser engraving to mark the date or name of the place
MEASUREMENTS
Ref.
054702
029704
Colour
White
Silver
Print area (cm)
9 x 12
9 x 12.5
Capacity (ml ≈ oz)
220 ≈ 7
237 ≈ 8
Flask (cm)
9.5 x 13.5 x 2
9.5 x 14 x 2
Mouth (cm)
Ø1.3
Ø1.3
Neck height (cm)
1.2
1.2
Net weight (g)
112
161
Box (cm)
9.5 x 14.5 x 2.5
9.5 x 14.5 x 2.5
RECOMMENDED SUBLIMATION INSTRUCTIONS AND PARAMETERS
Parameters indicated as guidelines. It is recommended to conduct preliminary tests to make necessary adjustments before starting production.
WITH TRANSFER PRESS AND FLASK ATTACHMENT
Print the design in mirror mode
Heat the press to 200 ºC
Remove the cap from the flask before sublimating
Place the printed side of the paper onto the flask and secure it with heat-resistant tape
Insert the flask into the compatible attachment of the transfer press
Close the press with medium-high pressure for 120 seconds
Using a protective glove, remove the freshly sublimated flask
Carefully remove the paper
WITH SUBLIMATION OVEN
Print the design in mirror mode
Unscrew the cap from the flask
Place the printed paper around the flask with the printed side in contact with the flask
Use a flask clamp, silicone sheet, or shrink bag to secure the design
Heat the sublimation oven to 200 ºC
Insert the flask for 5 minutes
Using a protective glove, remove the freshly sublimated flask
https://www.brildor.com/en/sublimable-stainless-steel-hip-flasks52838Sublimable Stainless Steel Hip Flasks<p><a name="know-more"></a></p>
<h2>More information about Sublimable Stainless Steel Hip Flasks</h2>
<p> </p>
<p>> <a href="#know-more1">Description</a></p>
<p>> <a href="#know-more2">Things to keep in mind</a></p>
<p>> <a href="#know-more3">Tips and advice</a></p>
<p>> <a href="#know-more4">Measurements</a></p>
<p>> <a href="#know-more5">Recommended sublimation instructions and parameters</a></p>
<p> </p>
<p class="enlace"><a id="know-more1"></a> </p>
<p><strong>DESCRIPTION</strong></p>
<ul>
<li>Perfect for your catalogue of customisable products for events, special celebrations, souvenirs...</li>
<li>Suitable for customisation with a sublimation oven using clamps, silicone sheets, or shrink bags (See <strong>Related Products</strong>)</li>
<li>Can also be customised using a transfer press with a special accessory for hip flasks</li>
<li>Interior made of brushed silver 304 stainless steel. Suitable for food consumption</li>
<li>High-quality, corrosion-resistant material</li>
<li>Slightly curved shape. Flat base</li>
<li>Metal cap with an inner silicone membrane to seal the flask hermetically</li>
<li>Presented in a white cardboard box</li>
<li>Can also be customised using other techniques such as <span class="azul-brildor-negrita">screen printing</span>, <span class="azul-brildor-negrita">DTF</span>, <span class="azul-brildor-negrita">adhesive vinyl</span>, <span class="azul-brildor-negrita">transfer</span>, <span class="azul-brildor-negrita">direct UV printing</span>, or <span class="azul-brildor-negrita">laser engraving</span></li>
</ul>
<p> </p>
<p class="enlace"><a id="know-more2"></a> </p>
<p><strong>THINGS TO KEEP IN MIND</strong></p>
<ul>
<li>The white flask is slightly smaller than the silver one. Its cap is also different</li>
<li>If using shrink bags, protect the parts of the flask that will not be customised with protective paper. This will prevent the bag from coming into direct contact with the metal and sticking to it</li>
<li>Dishwasher safe at maximum temperatures of <span class="azul-negrita">60 °C</span>. If the design has been applied with <span class="azul-brildor-negrita">adhesive vinyl</span> or <span class="azul-brildor-negrita">transfer paper</span>, dishwasher use is not recommended</li>
</ul>
<p> </p>
<p class="enlace"><a id="know-more3"></a> </p>
<p><strong>TIPS AND ADVICE</strong></p>
<ul>
<li>Stamp with logos for merchandising. Use laser engraving to add contact information or a corporate slogan</li>
<li>Sublimate a map or city coordinates, and use laser engraving to mark the date or name of the place</li>
</ul>
<p> </p>
<p class="enlace"><a id="know-more4"></a> </p>
<p><strong>MEASUREMENTS</strong></p>
<table>
<tbody>
<tr>
<td><strong>Ref.<br></strong></td>
<td style="text-align: center;"><strong>054702</strong></td>
<td style="text-align: center;"><strong>029704</strong></td>
</tr>
<tr>
<td><strong>Colour</strong></td>
<td style="text-align: center;">White</td>
<td style="text-align: center;">Silver</td>
</tr>
<tr>
<td><strong>Print area (cm)<br></strong></td>
<td class="azul-negrita" style="text-align: center;">9 x 12</td>
<td class="azul-negrita" style="text-align: center;">9 x 12.5</td>
</tr>
<tr>
<td><strong>Capacity (ml ≈ oz)<br></strong></td>
<td class="azul-negrita" style="text-align: center;">220 ≈ 7</td>
<td class="azul-negrita" style="text-align: center;">237 ≈ 8</td>
</tr>
<tr>
<td><strong>Flask (cm)<br></strong></td>
<td class="azul-negrita" style="text-align: center;">9.5 x 13.5 x 2</td>
<td class="azul-negrita" style="text-align: center;">9.5 x 14 x 2</td>
</tr>
<tr>
<td><strong>Mouth (cm)<br></strong></td>
<td class="azul-negrita" style="text-align: center;">Ø1.3</td>
<td class="azul-negrita" style="text-align: center;">Ø1.3</td>
</tr>
<tr>
<td><strong>Neck height (cm)<br></strong></td>
<td class="azul-negrita" style="text-align: center;">1.2</td>
<td class="azul-negrita" style="text-align: center;">1.2</td>
</tr>
<tr>
<td><strong>Net weight (g)<br></strong></td>
<td style="text-align: center;"><span class="azul-negrita">112</span></td>
<td style="text-align: center;"><span class="azul-negrita">161</span></td>
</tr>
<tr>
<td><strong>Box (cm)<br></strong></td>
<td class="azul-negrita" style="text-align: center;">9.5 x 14.5 x 2.5</td>
<td class="azul-negrita" style="text-align: center;">9.5 x 14.5 x 2.5</td>
</tr>
</tbody>
</table>
<p> </p>
<p class="enlace"><a id="know-more5"></a> </p>
<p><strong>RECOMMENDED SUBLIMATION INSTRUCTIONS AND PARAMETERS</strong></p>
<p>Parameters indicated as <strong>guidelines</strong>. It is recommended to conduct preliminary tests to make necessary adjustments before starting production.</p>
<p><strong>WITH TRANSFER PRESS AND FLASK ATTACHMENT<br></strong></p>
<ul>
<li>Print the design in <strong>mirror mode</strong></li>
<li>Heat the press to <span class="azul-negrita">200 ºC</span></li>
<li>Remove the cap from the flask before sublimating</li>
<li>Place the printed side of the paper onto the flask and secure it with heat-resistant tape</li>
<li>Insert the flask into the compatible attachment of the transfer press</li>
<li>Close the press with <strong>medium-high</strong> pressure for <span class="azul-negrita">120 seconds</span></li>
<li>Using a protective glove, remove the freshly sublimated flask</li>
<li>Carefully remove the paper</li>
</ul>
<p><strong>WITH SUBLIMATION OVEN</strong></p>
<ul>
<li>Print the design in <strong>mirror mode</strong></li>
<li>Unscrew the cap from the flask</li>
<li>Place the printed paper around the flask with the printed side in contact with the flask</li>
<li>Use a flask clamp, silicone sheet, or shrink bag to secure the design</li>
<li>Heat the sublimation oven to <span class="azul-negrita">200 ºC</span></li>
<li>Insert the flask for <span class="azul-negrita">5 minutes</span></li>
<li>Using a protective glove, remove the freshly sublimated flask</li>
<li>Carefully remove the paper</li>
</ul>
<p> </p>https://www.brildor.com/media/catalog/product/p/e/petacas-acero-inoxidable-sublimable-d12.jpg4.65instock04.65000https://www.brildor.com/media/catalog/product/p/e/petacas-acero-inoxidable-sublimable-d12.jpg2039225580274304885552651/Blanks/Blanks/Water Bottles & Flasks/Blanks/Water Bottles & Flasks/Water Bottles/Blanks/Souvenirs2024-09-24T11:02:06+0000
How to Sublimate a Sublimatable Stainless Steel Flask
