Front panel with 4 holes for earrings and 2 slots for hanging necklaces or bracelets
Jewellery holder easy assembly. The front panel and the base have a slot to fit these pieces together
DM wood stand with a glossy white sublimable face. Back and edges are brown
The sublimable face of the natural wood stand is clearer and shinier than the back
Can also be customised by laser engraving, adhesive vinyl, UV DTF, transfer, screen printing, and UV printing
THINGS TO KEEP IN MIND
The sublimable face of the DM stand has a clear protective plastic film that must be removed before sublimation. It may also have a white paper layer that can be easily removed
TIPS AND ADVICE
Protect the design from wear or provide a glossy finish by applying protective varnish to the wood
Apply solid wax to the engraving on the stand for a metallic finish
MEASUREMENTS
Front printing area (cm)
8 x 12
Base printing area (cm)
6 x 8
Thickness (mm)
3
Assembled stand (cm)
8 x 12 x 5.7
RECOMMENDED SUBLIMATION INSTRUCTIONS AND PARAMETERS
Parameters indicated as guidance only. It is recommended to conduct preliminary tests to make necessary adjustments before starting production.
Print the design in mirror mode
Heat the press to 200 °C
Remove the paper and clear protective plastic from the sublimable face of the stand
Pre-press for 5-10 seconds
Place the stand on the press and the printed side of the paper on the customisable face of the stand. Secure it with heat-resistant tape
Close the press with a medium-high pressure for 60 seconds
Using a protective glove, remove the freshly sublimated stand
Carefully remove the paper and finally attach the base to the stand
https://www.brildor.com/en/sublimable-wooden-stands-jewellery52996Sublimable Wooden Stands for Jewellery<p><a name="know-more"></a></p>
<h2>More information about the Sublimable Wooden Stands for Jewellery</h2>
<p> </p>
<p><strong>INDEX</strong></p>
<p>> <a href="#know-more1">Description</a></p>
<p>> <a href="#know-more2">Things to keep in mind</a></p>
<p>> <a href="#know-more5">Tips and advice</a></p>
<p>> <a href="#know-more3">Measurements</a></p>
<p>> <a href="#know-more4">Recommended sublimation instructions and parameters</a></p>
<p> </p>
<p class="enlace"><a id="know-more1"></a> </p>
<p><strong>DESCRIPTION</strong></p>
<ul>
<li>Front panel with 4 holes for earrings and 2 slots for hanging necklaces or bracelets</li>
<li>Jewellery holder easy assembly. The front panel and the base have a slot to fit these pieces together</li>
<li>DM wood stand with a glossy white sublimable face. Back and edges are brown</li>
<li>The sublimable face of the natural wood stand is clearer and shinier than the back</li>
<li>Can also be customised by <span class="azul-brildor-negrita">laser engraving</span>, <span class="azul-brildor-negrita">adhesive vinyl</span>, <span class="azul-brildor-negrita">UV DTF</span>, <span class="azul-brildor-negrita">transfer</span>, <span class="azul-brildor-negrita">screen printing</span>, and <span class="azul-brildor-negrita">UV printing</span></li>
</ul>
<p> </p>
<p class="enlace"><a id="know-more2"></a> </p>
<p><strong>THINGS TO KEEP IN MIND</strong></p>
<ul>
<li>The sublimable face of the DM stand has a clear protective plastic film that must be removed before sublimation. It may also have a white paper layer that can be easily removed</li>
</ul>
<p> </p>
<p class="enlace"><a id="know-more5"></a> </p>
<p><strong>TIPS AND ADVICE</strong></p>
<ul>
<li>Protect the design from wear or provide a glossy finish by applying protective varnish to the wood</li>
<li>Apply solid wax to the engraving on the stand for a metallic finish</li>
</ul>
<p> </p>
<p class="enlace"><a id="know-more3"></a> </p>
<p><strong>MEASUREMENTS</strong></p>
<table>
<tbody>
<tr>
<td><strong>Front printing area (cm)</strong></td>
<td><span class="azul-negrita">8 x 12</span></td>
</tr>
<tr>
<td><strong>Base printing area (cm)</strong></td>
<td><span class="azul-negrita">6 x 8</span></td>
</tr>
<tr>
<td><strong>Thickness (mm)</strong></td>
<td><span class="azul-negrita">3</span></td>
</tr>
<tr>
<td><strong>Assembled stand (cm)</strong></td>
<td><span class="azul-negrita">8 x 12 x 5.7</span></td>
</tr>
</tbody>
</table>
<p> </p>
<p class="enlace"><a id="know-more4"></a> </p>
<p><strong>RECOMMENDED SUBLIMATION INSTRUCTIONS AND PARAMETERS</strong></p>
<p>Parameters indicated as <strong>guidance only</strong>. It is recommended to conduct preliminary tests to make necessary adjustments before starting production.</p>
<ul>
<li>Print the design in <strong>mirror mode</strong></li>
<li>Heat the press to <span class="azul-negrita">200 °C</span></li>
<li>Remove the paper and clear protective plastic from the sublimable face of the stand</li>
<li>Pre-press for <span class="azul-negrita">5-10 seconds</span></li>
<li>Place the stand on the press and the printed side of the paper on the customisable face of the stand. Secure it with heat-resistant tape</li>
<li>Close the press with a <strong>medium-high pressure</strong> for <span class="azul-negrita">60 seconds</span></li>
<li>Using a protective glove, remove the freshly sublimated stand</li>
<li>Carefully remove the paper and finally attach the base to the stand</li>
</ul>https://www.brildor.com/media/catalog/product/s/o/soportes-madera-sublimable-para-bisuter_a-reverso-d1.jpg1.95instock01.95000https://www.brildor.com/media/catalog/product/s/o/soportes-madera-sublimable-para-bisuter_a-reverso-d1.jpg2228623265434355012051582/Blanks/Blanks/Jewellery/Blanks/Only at Brildor/Blanks/Tools & Accessories/Blanks/Jewellery/Exhibitors2024-10-25T10:02:05+0000
