The face printable has a film protective film that has to be removed before sublimation.
To glue these sheets you can use double-sided (o sheets from magnet adhesive) that you will find in Related Products
Customisable on one side, the back silver colour is not sublimate
DIMENSIONS
Ref.
033609
053374
033870
033619
Print area (mm)
25 x 21
25 x 27
32 x 27
37 x 32
RECOMMENDED INSTRUCTIONS AND PARAMETERS FOR SUBLIMATION PRINTING
Parameters given for guidance only. It is recommended to carry out preliminary tests in order to make the necessary adjustments before starting production.
Print the design in mode mirror
Preheat the press to 200 ºC
Remove the protective film from the white side of the sheet
Place the sheet on the press and the printed part of the paper on the white side of the sheet. Fix it with thermal adhesive tape
Close the press with medium pressure for 40 seconds
With the help of a protective glove remove the freshly sublimated plate sheet or freshly sublimated plate
https://www.brildor.com/en/sublimation-aluminium-heart-plaques48807Sublimation Aluminium Heart Plaques<p class="enlace"><a id="saber-mas"></a> </p>
<h2>More information about the Sublimation Aluminium Heart Plaques</h2>
<p> </p>
<p><strong>INDEX</strong></p>
<p>> <a href="#saber-mas2">Things to keep in mind</a></p>
<p>> <a href="#saber-mas3">Dimensions</a></p>
<p>> <a href="#saber-mas4">Recommended instructions and parameters for sublimation printing</a></p>
<p> </p>
<p class="enlace"><a id="saber-mas2"></a> </p>
<p><strong>THINGS TO KEEP IN MIND<br></strong></p>
<ul>
<li>The face printable has a film protective film that has to be removed before sublimation.</li>
<li>To glue these sheets you can use double-sided (o sheets from magnet adhesive) that you will find in <strong>Related Products</strong></li>
<li>Customisable on one side, the back silver colour is not sublimate</li>
</ul>
<p> </p>
<p class="enlace"><a id="saber-mas3"></a> </p>
<p><strong>DIMENSIONS </strong></p>
<table >
<tbody>
<tr>
<td ><strong>Ref.</strong></td>
<td ><strong>033609</strong></td>
<td ><strong>053374<br></strong></td>
<td ><strong>033870</strong></td>
<td ><strong>033619</strong></td>
</tr>
<tr>
<td ><strong>Print area (mm)</strong></td>
<td ><span class="azul-negrita">25 x 21</span></td>
<td ><span class="azul-negrita">25 x 27<br></span></td>
<td ><span class="azul-negrita">32 x 27</span></td>
<td ><span class="azul-negrita">37 x 32</span></td>
</tr>
</tbody>
</table>
<p> </p>
<p class="enlace"><a id="saber-mas4"></a> </p>
<p><strong>RECOMMENDED INSTRUCTIONS AND PARAMETERS FOR SUBLIMATION PRINTING<br></strong></p>
<p>Parameters given <strong>for guidance</strong> only. It is recommended to carry out preliminary tests in order to make the necessary adjustments before starting production.</p>
<ul>
<li>Print the design in <strong>mode</strong> <strong> mirror</strong></li>
<li>Preheat the press to <span class="azul-negrita">200 ºC</span></li>
<li>Remove the protective film from the white side of the sheet</li>
<li>Place the sheet on the press and the printed part of the paper on the white side of the sheet. Fix it with thermal adhesive tape</li>
<li>Close the press with <strong>medium pressure</strong> for <span class="azul-negrita">40 seconds</span></li>
<li>With the help of a protective glove remove the freshly sublimated plate sheet or freshly sublimated plate</li>
<li>Carefully peel off the paper</li>
</ul>https://www.brildor.com/media/catalog/product/l/a/lainas-aluminio-corazon-sublimables.jpg0.29instock00.29000https://www.brildor.com/media/catalog/product/l/a/lainas-aluminio-corazon-sublimables.jpg20089270752772049624/Blanks/Blanks/Plates & Signs2022-10-07T10:36:28+0000
