Search
Starting at:
€1.30
/ Each Unit
Sublimation Can Cooler
Ref.
036374
Thermal sleeve designed for cans you can personalise using dye sublimation printing. Keeps drinks at the desired temperature for longer.
- Made of white polyester with black neoprene backing
- Suitable for cans up to 6 cm in diameter
- Print area: 20.5 x 9 cm
Availability:
Immediate: 0 units
Expected entries:
14/01/25: 60 units
16/02/25: 100 units
Expected entries:
14/01/25: 60 units
16/02/25: 100 units
Please, give us an estimate of the quantity you need:
As a Premium Brildor Member, for each unit you buy, you will accumulate {{POINTS}}
to redeem on your next order. Discover the Brildor Loyalty Program.
For each unit you buy, you will accumulate {{POINTS}} to redeem
on your next order. Discover the Brildor Loyalty Program.
€1.85
VAT not included
/ Each Unit
- Buy 10 for €1.67 each
- Buy 100 for €1.48 each
- Buy 300 for €1.30 each
Please, give us an estimate of the quantity you need:
We'll let you know as soon as it's available.
This is a non-binding service.
This is a non-binding service.
Related Products
More information about the sublimation can cooler
INDEX
> Recommended instructions and parameters for sublimation printing
DESCRIPTION
- Velcro fastener
- Thick, padded fabric. Prevents the can from slipping out of your hand
THINGS TO KEEP IN MIND
- It is recommended to protect the black part of the band by covering it with heat-resistant tape and protective paper so that it does not get damaged during sublimation
- You can use a Teflon pad to apply pressure evenly, ensuring optimal results
DIMENSIONS
| Open sleeve (cm) | 25.5 x 10.5 |
| Closed sleeve (cm) | Ø6 x 10.5 |
| Max. can diameter (cm) | Ø6 |
| Thickness (cm) | 0.7 |
| Print area (cm) | 20.5 x 9 |
| Weight (g) | 34 |
RECOMMENDED INSTRUCTIONS AND PARAMETERS FOR SUBLIMATION PRINTING
- Print the design in mirror image
- Preheat the press to 200ºC
- Cover the velcro and the black part of the sleeve with heat-resistant tape so that it does not burn or stain during sublimation
- Place a Teflon pad on the lower platen of the press
- Lay the sleeve on the Teflon pad and the paper's printed side against the sleeve. Fix them with heat-resistant tape
- Cover with protective paper
- Press for 50 seconds, medium pressure
- Remove the newly printed can cooler using a protective glove
- Carefully peel off the paper
| Ref. | 036374 |
|---|---|
| Gross Weight (kg) | 0.034 |
| Billable Weight (kg) | 0.0370 |
| Dimensions (mm) | 255 x 105 |
| Print area (mm) | 205 x 90 |
| Thickness (mm) | 7 |
| Colour | White, Black |
| Surface material | Tissue |
| Items | Bands |
| Composition | Neoprene, 100% Polyester |
| Accessory details | Velcro |
| Marking techniques | Dye sublimation |
Write Your Own Review
Post your question