White elastic strap sewn at the ends that can be moved from the back to the front to put the insert
It can also be personalised with other techniques such as DTG, DTF, transfer, HTV or screen printing
THINGS TO KEEP IN MIND
The back of the cover is made of the same fabric as the front, so it can also be sublimated. However, it is recommended to test beforehand if you want to use this technique
DIMENSIONS
Cover
Dimensions (cm)
21 x 30.5
Units per pack (no.)
2
Elastic strap (cm)
3 x 30.5
Sip fastener (cm)
20
Print area (cm)
21 x 30.5
Cover weight (g)
68
Pack weight (g)
136
Pillow Insert
Dimensions (cm)
24 x 33
Thickness (cm)
8
Weight (g)
122
WASHING RECOMMENDATIONS
Machine wash at 30ºC maximum
Do not bleach or dry clean
Air dry preferably
RECOMMENDED INSTRUCTIONS AND PARAMETERS FOR SUBLIMATION PRINTING
Print the design in mirror image
Preheat the oven to 215ºC
Place the cover on the lower platen of the press and the paper's printed side against
Cover with protective paper
Press for 45 seconds, medium-heavy pressure
Using a protective glove, remove the newly printed cover
https://www.brildor.com/en/sublimation-car-headrest-pillow-case-pillow-insert50554Sublimation Car Headrest Pillow Case & Pillow Insert<p class="enlace"><a id="know-more"></a> </p>
<h2>More information about the sublimation car headrest pillow case and pillow insert</h2>
<p> </p>
<p><strong>INDEX</strong></p>
<p>> <a href="#know-more1">Description</a></p>
<p>> <a href="#know-more2">Things to keep in mind</a></p>
<p>> <a href="#know-more3">Dimensions</a></p>
<p>> <a href="#know-more4">Washing recommendations</a></p>
<p>> <a href="#know-more5">Recommended instructions and parameters for sublimation printing</a></p>
<p> </p>
<p><a name="know-more1"></a></p>
<p><strong>DESCRIPTION</strong></p>
<ul>
<li>Ecru white fabric with matte finish</li>
<li>Invisible zip fastener on the back to make it easy to insert the pillow insert</li>
<li>100% polyester pillow insert. Breathable hollow fibre</li>
<li>White elastic strap sewn at the ends that can be moved from the back to the front to put the insert</li>
<li>It can also be personalised with other techniques such as <span class="azul-brildor-negrita">DTG</span>, <span class="azul-brildor-negrita">DTF</span>, <span class="azul-brildor-negrita">transfer</span>, <span class="azul-brildor-negrita">HTV</span> or <span class="azul-brildor-negrita">screen printing</span></li>
</ul>
<p> </p>
<p><a name="know-more2"></a></p>
<p><strong>THINGS TO KEEP IN MIND</strong></p>
<ul>
<li>The back of the cover is made of the same fabric as the front, so it can also be sublimated. However, it is recommended to test beforehand if you want to use this technique</li>
</ul>
<p> </p>
<p><a name="know-more3"></a></p>
<p><strong>DIMENSIONS</strong></p>
<p><strong>Cover</strong></p>
<table width="487">
<tbody>
<tr>
<td><strong>Dimensions (cm)</strong></td>
<td><span class="azul-negrita">21 x 30.5<br></span></td>
</tr>
<tr>
<td><strong>Units per pack (no.)<br></strong></td>
<td><span class="azul-negrita">2<br></span></td>
</tr>
<tr>
<td><strong>Elastic strap (cm)</strong></td>
<td><span class="azul-negrita">3 x 30.5<br></span></td>
</tr>
<tr>
<td><strong>Sip fastener (cm)</strong></td>
<td><span class="azul-negrita">20<br></span></td>
</tr>
<tr>
<td><strong>Print area (cm)</strong></td>
<td><span class="azul-negrita">21 x 30.5</span></td>
</tr>
<tr>
<td><strong>Cover weight (g)</strong></td>
<td><span class="azul-negrita">68<br></span></td>
</tr>
<tr>
<td><strong>Pack weight (g)<br></strong></td>
<td><span class="azul-negrita">136<br></span></td>
</tr>
</tbody>
</table>
<p><strong>Pillow Insert<br></strong></p>
<table>
<tbody>
<tr>
<td><strong>Dimensions (cm)</strong></td>
<td><span class="azul-negrita">24 x 33 <br></span></td>
</tr>
<tr>
<td><strong>Thickness (cm)</strong></td>
<td><span class="azul-negrita"> 8</span></td>
</tr>
<tr>
<td><strong>Weight (g)</strong></td>
<td><span class="azul-negrita"> 122</span></td>
</tr>
</tbody>
</table>
<p> </p>
<p><a name="know-more4"></a></p>
<p><strong>WASHING RECOMMENDATIONS</strong></p>
<ul>
<li>Machine wash at <span class="azul-negrita">30ºC</span> maximum</li>
<li>Do not bleach or dry clean</li>
<li>Air dry preferably</li>
</ul>
<p> </p>
<p><a name="know-more5"></a></p>
<p><strong>RECOMMENDED INSTRUCTIONS AND PARAMETERS FOR SUBLIMATION PRINTING</strong></p>
<ul>
<li>Print the design in <strong>mirror image</strong></li>
<li>Preheat the oven to <span class="azul-negrita">215ºC</span></li>
<li>Place the cover on the lower platen of the press and the paper's printed side against</li>
<li>Cover with protective paper</li>
<li>Press for <span class="azul-negrita">45 seconds</span>, <strong>medium-heavy</strong> pressure</li>
<li>Using a protective glove, remove the newly printed cover</li>
<li>Carefully peel off the paper</li>
<li>Repeat the same steps to sublimate the other side</li>
</ul>https://www.brildor.com/media/catalog/product/f/u/fundas-cojin-sublimable-reposacabezas-d8.jpg2.2instock02.2000https://www.brildor.com/media/catalog/product/f/u/fundas-cojin-sublimable-reposacabezas-d8.jpg196571984924407448785236752407/Blanks/Blanks/Cushions/Blanks/Car/Blanks/Much more/Blanks/Cushions/Other2023-08-11T11:33:25+0000
