Ideal for personalising several cups with designs and when stacked together, they will form an original composition
Useful as a no handle mug to save storage space in the kitchen, pencil pot or planter
Lower part of smaller diameter to fit into other mugs of the same type
Resistant to microwave and dishwasher
Can also be customised using other techniques such as DTF, screen printing, transfer y self-adhesive vinyl
In the Related Products you will find different models of presentation boxes suitable for this cup
THINGS TO KEEP IN MIND
You can sublimate the bottom part using the heat shrink bags, one stripping gun and a sublimation oven. The upper part can be sublimated with as well as with a heat pressas well as with sublimation oven
DIMENSIONS
Maximum capacity (oz ≈ ml)
12 ≈ 360
Inner diameter (cm)
Ø7.3
Outside diameter (cm)
Ø8.4
Base (cm)
Ø6.1
Height (cm)
10.3
Thickness (mm)
3
Top area (cm) printable top (cm)
26.5 x 5.5
Bottom area (cm) printable bottom (cm)
21.5 x 4
Weight (g)
318
RECOMMENDED INSTRUCTIONS AND PARAMETERS FOR SUBLIMATION PRINTING
Parameters given for guidance only. It is recommended to carry out preliminary tests in order to make the necessary adjustments before starting production.
WITH CUP PLATE
Print the design in mode mirror
Preheat the press to 200 ºC
Place the printed paper around the glass, and stick it with adhesive tape thermal
Close the press at medium pressure for 180-200 seconds
With the help of a protective glove, remove the freshly printed glass.
Carefully peel off the paper
WITH A SUBLIMATION OVEN
Print the design in mode mirror
Preheat the press to 200 ºC
Place the printed design in mirror image around the beaker and fix it using adhesive heat tape.
Tighten the clamp, or insert the beaker into a heat shrinkable bag heat shrink and heat with the heat shrink stripping gun avoiding the formation of wrinkles. You can also use a silicone sheet
Sublimate in the oven for 8 minutes
Using a protective glove, remove the wrap, the silicone sheet, or the bag, depending on the accessory you used
https://www.brildor.com/en/sublimation-ceramic-stackable-glass25687Sublimmation Ceramic Stackable Glass<p><a name="saber-mas"></a></p>
<h2>More information about the Sublimation Ceramic Stackable Glass</h2>
<p> </p>
<p><strong>INDEX</strong></p>
<p>> <a href="#saber-mas1">Description</a></p>
<p>> <a href="#saber-mas2">Things to keep in mind</a></p>
<p>> <a href="#saber-mas3">Dimensions</a></p>
<p>> <a href="#saber-mas4">Recommended instructions and parameters for sublimation printing</a></p>
<p> </p>
<p class="enlace"><a id="saber-mas1"></a> </p>
<p><strong>DESCRIPTION</strong></p>
<ul>
<li>Ideal for personalising several cups with designs and when stacked together, they will form an original composition</li>
<li>Useful as a no handle mug to save storage space in the kitchen, pencil pot or planter</li>
<li>Lower part of smaller diameter to fit into other mugs of the same type</li>
<li>Resistant to microwave and dishwasher</li>
<li>Can also be customised using other techniques such as <span class="azul-brildor-negrita">DTF</span>, <span class="azul-brildor-negrita">screen printing</span>, <span class="azul-brildor-negrita">transfer</span> y <span class="azul-brildor-negrita">self-adhesive vinyl</span></li>
<li>In the <strong>Related Products</strong> you will find different models of presentation boxes suitable for this cup</li>
</ul>
<p> </p>
<p class="enlace"><a id="saber-mas2"></a> </p>
<p><strong>THINGS TO KEEP IN MIND</strong></p>
<ul>
<li>You can sublimate the bottom part using the heat shrink bags, one stripping gun and a sublimation oven. The upper part can be sublimated with as well as with a heat pressas well as with sublimation oven</li>
</ul>
<p> </p>
<p class="enlace"><a id="saber-mas3"></a> </p>
<p><strong>DIMENSIONS </strong></p>
<table>
<tbody>
<tr>
<td><strong>Maximum capacity (oz ≈ ml)<br></strong></td>
<td><span class="azul-negrita">12 ≈ 360<br></span></td>
</tr>
<tr>
<td><strong>Inner diameter (cm)<br></strong></td>
<td><span class="azul-negrita">Ø7.3 <br></span></td>
</tr>
<tr>
<td><strong>Outside diameter (cm)<br></strong></td>
<td><span class="azul-negrita">Ø8.4 <br></span></td>
</tr>
<tr>
<td><strong>Base (cm)<br></strong></td>
<td><span class="azul-negrita">Ø6.1 <br></span></td>
</tr>
<tr>
<td><strong>Height (cm)<br></strong></td>
<td><span class="azul-negrita">10.3 <br></span></td>
</tr>
<tr>
<td><strong>Thickness (mm)<br></strong></td>
<td><span class="azul-negrita">3 <br></span></td>
</tr>
<tr>
<td><strong>Top area (cm) printable top (cm)<br></strong></td>
<td><span class="azul-negrita">26.5 x 5.5 <br></span></td>
</tr>
<tr>
<td><strong>Bottom area (cm) printable bottom (cm)<br></strong></td>
<td><span class="azul-negrita">21.5 x 4 <br></span></td>
</tr>
<tr>
<td><strong>Weight (g)<br></strong></td>
<td><span class="azul-negrita">318 <br></span></td>
</tr>
</tbody>
</table>
<p> </p>
<p class="enlace"><a id="saber-mas3"></a> </p>
<p><strong>RECOMMENDED INSTRUCTIONS AND PARAMETERS FOR SUBLIMATION PRINTING</strong></p>
<p>Parameters given <strong>for guidance</strong> only. It is recommended to carry out preliminary tests in order to make the necessary adjustments before starting production.</p>
<p><strong><strong>WITH CUP PLATE</strong></strong></p>
<ul>
<li>Print the design in <strong>mode</strong> <strong> mirror</strong></li>
<li>Preheat the press to <span class="azul-negrita">200 ºC</span></li>
<li>Place the printed paper around the glass, and stick it with adhesive tape thermal</li>
<li>Close the press at <strong>medium</strong> pressure for <span class="azul-negrita">180-200 seconds</span></li>
<li>With the help of a protective glove, remove the freshly printed glass.</li>
<li>Carefully peel off the paper</li>
</ul>
<p><strong>WITH A SUBLIMATION OVEN<br></strong></p>
<ul>
<li>Print the design in <strong>mode</strong> <strong> mirror</strong></li>
<li>Preheat the press to <span class="azul-negrita">200 ºC</span></li>
<li>Place the printed design in mirror image around the beaker and fix it using adhesive heat tape.</li>
<li>Tighten the clamp, or insert the beaker into a heat shrinkable bag heat shrink and heat with the heat shrink stripping gun avoiding the formation of wrinkles. You can also use a silicone sheet</li>
<li>Sublimate in the oven for <span class="azul-negrita">8 minutes</span></li>
<li>Using a protective glove, remove the wrap, the silicone sheet, or the bag, depending on the accessory you used</li>
<li>Carefully peel off the paper of the glass</li>
</ul>https://www.brildor.com/media/catalog/product/v/a/vaso-de-ceramica-apilable-para-sublimacion-d1.jpg2.25instock2.252.2500000https://www.brildor.com/media/catalog/product/v/a/vaso-de-ceramica-apilable-para-sublimacion-d1.jpg246292483525103259554289343554/Blanks/Blanks/Beer Steins & Tumblers/Blanks/Beer Steins & Tumblers/Tumblers & Cups2021-07-24T05:32:47+0000