Metal mug printable by dye sublimation printing with capacity of 380 ml (13 oz). Retro design, coating with gloss finish and small imperfections for a vintage look. Chrome-plated rim.
Customisable with heat press y sublimation oven using mug wraps, silicone sheets o heat shrink bags
It can also be customised with other techniques such as laser engraving, transfer, self-adhesive vinyl, screen printing...
It is presented in a box from white cardboard
THINGS TO KEEP IN MIND
This mug is not cylindrical due to the edge chrome plating protruding from its surface. For this reason, it is advisable to stamp it in its central part, at the level of the handle keeping 1 cmofseparation from both the edge and the base
In the video available below the photos, we explain step by step some tricks to facilitate the dye sublimation printing of this mug using heat press y silicone sheets
It is advisable to wash this mug by hand
Mug not suitable for microwave
DIMENSIONS (APPROX.)
Capacity (oz ≈ ml)
13 ≈ 380
Inner diameter (cm)
Ø7,7
Outside diameter (cm)
Ø8,7
Height (cm)
8
Base (cm)
Ø7,8
Thickness (cm)
0,3
Handle (cm)
1,5 x 5,5
Distance mug-handle (cm)
3
Print area (cm)
22 x 5,5
Presentation box (cm)
9,5 x 11 x 9
Weight (cm)
138
RECOMMENDED INSTRUCTIONS AND PARAMETERS FOR SUBLIMATION PRINTING
Parameters given as a guideline. It may vary due to many factors such as the paper used, the inks or ambient temperature. For this reason, it is recommended to perform tests.
WITH A CUP IRON
Print the design in image mirror
Preheat the press to 180 °C
Hold the paper's printed side against the mug and fix it with heat-resistant tape
Place the mug on the press leaving the edge outside. To ensure that the pressure is homogeneous over the entire surface, place another mug on the opposite side of the resistor.
Close the press with a medium-high pressure for 150 seconds
With the help of a protective glove, remove the newly stamped mug freshly printed
Carefully peel off the paper
WITH SUBLIMATION OVEN
Print the design in image mirror
Heat the oven to 180 °C
Hold the paper's printed side against the mug and fix it with heat-resistant tape
Adjust the clamp, or insert the mug into a heat shrink bag heat shrink and heat up with the stripping gun. You can also use a heat shrink silicone sheet
Place the mug in the oven for 6 minutes
Using a protective glove, remove the wrap, the silicone sheet, or the bag, depending on the accessory you used
https://www.brildor.com/en/sublimation-enamel-mug-13oz25437Sublimation Enamel Mug - 13oz<p class="enlace"><a id="saber-mas"></a> </p>
<h2>More information about the Sublimation Enamel Mug - 13oz</h2>
<p> </p>
<p><strong>INDEX</strong></p>
<p>> <a href="#saber-mas1">Description</a></p>
<p>> <a href="#saber-mas2">Things to keep in mind</a></p>
<p>> <a href="#saber-mas3">Dimensions (approx.)</a></p>
<p>> <a href="#saber-mas4">Recommended instructions and parameters for sublimation printing</a></p>
<p> </p>
<p class="enlace"><a id="saber-mas1"></a> </p>
<p><strong>DESCRIPTION</strong></p>
<ul>
<li>Pewter mug vintage style with finish enamel</li>
<li>Customisable with heat press y sublimation oven using mug wraps, silicone sheets o heat shrink bags</li>
<li>It can also be customised with other techniques such as <span class="azul-brildor-negrita">laser engraving</span>, <span class="azul-brildor-negrita">transfer</span>, <span class="azul-brildor-negrita">self-adhesive vinyl</span>, <span class="azul-brildor-negrita">screen printing</span>...</li>
<li>It is presented in a box from white cardboard</li>
</ul>
<p> </p>
<p class="enlace"><a id="saber-mas2"></a> </p>
<p><strong>THINGS TO KEEP IN MIND</strong></p>
<ul>
<li>This mug <strong>is not cylindrical</strong> due to the edge chrome plating protruding from its surface. For this reason, it is advisable to <strong>stamp it in its central part,</strong> at the level of the handle keeping <span class="azul-negrita">1 cm</span> <strong>of</strong> <strong>separation from both the edge and the base</strong></li>
<li>In the video available below the photos, we explain step by step some tricks to facilitate the dye sublimation printing of this mug using heat press y silicone sheets</li>
<li>It is advisable to wash this mug by hand</li>
<li>Mug not suitable for microwave</li>
</ul>
<p> </p>
<p class="enlace"><a id="saber-mas3"></a> </p>
<p><strong>DIMENSIONS (APPROX.)</strong></p>
<table>
<tbody>
<tr>
<td><strong>Capacity (oz ≈ ml)</strong></td>
<td><span class="azul-negrita">13 ≈ 380<br></span></td>
</tr>
<tr>
<td><strong>Inner diameter (cm)</strong></td>
<td class="azul-negrita">Ø7,7</td>
</tr>
<tr>
<td><strong>Outside diameter (cm)</strong></td>
<td><span class="azul-negrita">Ø8,7</span></td>
</tr>
<tr>
<td><strong>Height (cm)</strong></td>
<td><span class="azul-negrita">8</span></td>
</tr>
<tr>
<td><strong>Base (cm)</strong></td>
<td class="azul-negrita">Ø7,8</td>
</tr>
<tr>
<td><strong>Thickness (cm)<br></strong></td>
<td><span class="azul-negrita">0,3</span></td>
</tr>
<tr>
<td><strong>Handle (cm)</strong></td>
<td class="azul-negrita">1,5 x 5,5</td>
</tr>
<tr>
<td><strong>Distance mug-handle (cm)</strong></td>
<td><span class="azul-negrita">3</span></td>
</tr>
<tr>
<td><strong>Print area (cm)</strong></td>
<td class="azul-negrita">22 x 5,5</td>
</tr>
<tr>
<td><strong>Presentation box (cm)<br></strong></td>
<td><span class="azul-negrita">9,5 x 11 x 9<br></span></td>
</tr>
<tr>
<td><strong>Weight (cm)</strong></td>
<td><span class="azul-negrita">138</span></td>
</tr>
</tbody>
</table>
<p> </p>
<p class="enlace"><a id="saber-mas4"></a> </p>
<p><strong>RECOMMENDED INSTRUCTIONS AND PARAMETERS FOR SUBLIMATION PRINTING</strong></p>
<p>Parameters given as a <strong>guideline</strong>. It may vary due to many factors such as the paper used, the inks or ambient temperature. For this reason, it is recommended to perform tests.</p>
<p><strong>WITH A CUP IRON</strong></p>
<ul>
<li>Print the design in <strong>image</strong> <strong> mirror</strong></li>
<li>Preheat the press to <span class="azul-negrita">180 °C</span></li>
<li>Hold the paper's printed side against the mug and fix it with heat-resistant tape</li>
<li>Place the mug on the press leaving the edge outside. To ensure that the pressure is homogeneous over the entire surface, place another mug on the opposite side of the resistor.</li>
<li>Close the press with a <strong>medium-high pressure</strong> for <span class="azul-negrita">150 seconds</span></li>
<li>With the help of a protective glove, remove the newly stamped mug freshly printed</li>
<li>Carefully peel off the paper</li>
</ul>
<p><strong>WITH SUBLIMATION OVEN <br></strong></p>
<ul>
<li>Print the design in <strong>image</strong> <strong> mirror</strong></li>
<li>Heat the oven to <span class="azul-negrita">180 °C</span></li>
<li>Hold the paper's printed side against the mug and fix it with heat-resistant tape</li>
<li>Adjust the clamp, or insert the mug into a heat shrink bag heat shrink and heat up with the stripping gun. You can also use a heat shrink silicone sheet</li>
<li>Place the mug in the oven for <span class="azul-negrita">6 minutes</span></li>
<li>Using a protective glove, remove the wrap, the silicone sheet, or the bag, depending on the accessory you used</li>
<li>Carefully peel off the paper of the mug</li>
</ul>https://www.brildor.com/media/catalog/product/t/a/taza-enamel-blanca-sublimacion.jpg2.65instock2.652.6500000https://www.brildor.com/media/catalog/product/t/a/taza-enamel-blanca-sublimacion.jpg20392224422558025886/Blanks/Blanks/Mugs/Blanks/Mugs/Non-Ceramic Mugs2021-07-24T05:32:16+0000
