Reverse side with coating sublimatable on which it is printed directly. On the front side, the sublimated image as if it had volume, with 3D effect
It comes in a box white presentation box with window
DIMENSIONS
Photo panel (cm)
18 x 22.8
Thickness (cm)
1
Weight (kg)
1.08
Print area (cm)
17 x 21.8
RECOMMENDED INSTRUCTIONS AND PARAMETERS FOR SUBLIMATION PRINTING
Parameters are given as a guide only. It is recommended to carry out preliminary tests in order to make the necessary adjustments before starting production.
Print the design in direct mode
Preheat the press to 200 ºC
In order to properly sublimate this photo panel is recommended to use a Nomex pad, which is available at Related Products
Place the Nomex pad on the lower platen of the press y protective paper on the pad so that it does not smudge
Place the printed design on the back of the photo panel and fix it with heat adhesive tape
Place it on the press with the printable side downwards
Close the press at medium pressure for 240 seconds
With the help of a protective glove remove the photo panel from printed
https://www.brildor.com/en/sublimation-glass-photo-panel-17x2217342Sublimation Glass Photo Panel 17x22<p class="enlace"><a id="saber-mas"></a> </p>
<h2>More information about the Sublimation Glass Photo Panel 17x22</h2>
<p> </p>
<p><strong>INDEX</strong></p>
<p>> <a href="#saber-mas1">Description</a></p>
<p>> <a href="#saber-mas2">Dimensions</a></p>
<p>> <a href="#saber-mas3">Recommended instructions and parameters for sublimation printing</a></p>
<p> </p>
<p><a name="saber-mas1"></a></p>
<p><strong>DESCRIPTION</strong></p>
<ul>
<li>Including easy-to-use plastic stand assembly</li>
<li>Chamfered corners</li>
<li>Reverse side with coating sublimatable on which it is printed directly. On the front side, the sublimated image as if it had volume, with 3D effect</li>
<li>It comes in a box white presentation box with window</li>
</ul>
<p> </p>
<p><a name="saber-mas2"></a></p>
<p><strong>DIMENSIONS<br></strong></p>
<table>
<tbody>
<tr>
<td><strong>Photo panel (cm)</strong></td>
<td><span class="azul-negrita">18 x 22.8</span></td>
</tr>
<tr>
<td><strong>Thickness (cm)</strong></td>
<td><span class="azul-negrita">1</span></td>
</tr>
<tr>
<td><strong>Weight (kg)<br></strong></td>
<td><span class="azul-negrita">1.08</span></td>
</tr>
<tr>
<td><strong>Print area (cm)</strong></td>
<td><span class="azul-negrita">17 x 21.8 <br></span></td>
</tr>
</tbody>
</table>
<p> </p>
<p><a name="saber-mas3"></a></p>
<p><strong>RECOMMENDED INSTRUCTIONS AND PARAMETERS FOR SUBLIMATION PRINTING<br></strong></p>
<p>Parameters are given as <strong>a guide</strong> only. It is recommended to carry out preliminary tests in order to make the necessary adjustments before starting production.</p>
<ul>
<li>Print the design in <strong>direct mode<br></strong></li>
<li>Preheat the press to <span class="azul-negrita">200 ºC</span></li>
<li>In order to properly sublimate this photo panel is recommended to use a <strong>Nomex pad</strong>, which is available at<strong> Related Products</strong></li>
<li>Place the Nomex pad on the lower platen of the press y protective paper on the pad so that it does not smudge</li>
<li>Place the printed design on the back of the photo panel and fix it with heat adhesive tape</li>
<li>Place it on the press with the printable side downwards</li>
<li>Close the press at <strong>medium pressure</strong> for <span class="azul-negrita">240 seconds</span></li>
<li>With the help of a protective glove remove the photo panel from printed</li>
<li>Carefully peel off the paper</li>
</ul>https://www.brildor.com/media/catalog/product/f/o/fotopanel-cristal-17x22-sublimable-principal.jpg6.85instock6.856.8500000https://www.brildor.com/media/catalog/product/f/o/fotopanel-cristal-17x22-sublimable-principal.jpg173432292925940/Blanks/Blanks/Sublimation Photo Panels/Blanks/Sublimation Photo Panels/Glass2021-07-24T05:27:44+0000