Perfect for modern and rustic decor, as well as a gift for Valentine's or Mother's Day, a wedding, an anniversary or a birthday
Bevelled edges that show the uneven cuts of the stone, simulating the marks of a chisel
Both models include 2 black plastic stands to place the photo slate on flat surfaces
The Ref. 036114 photo slate has 2 holes at the top to insert the jute cord that comes with it. It can be hung on the wall or placed on a table
White printable side delimited by an irregular border. Back in black
Can be personalised with a heat press or vacuum membrane sublimation oven
Durable and long-lasting natural stone
Supplied wrapped in air bubbles inside a cardboard box
THINGS TO KEEP IN MIND
It may have some slight irregularities on its surface due to the natural morphology of the rock from which it is extracted
It is recommended to use a Nomex pad when sublimating with a heat press machine
DIMENSIONS
Reference
036114
033796 056118
038063
Photo frame
19 x 19.5 cm
14.3 x 14.9 cm
19.5 x 20 cm
Print area (cm)
18.2 x 18.7
13.5 x 13.8
18.3 x 19
Finish
Gloss
Gloss Matte
Gloss
Thickness (mm)
8
8
8
Ribbon (cm)
Ø4 x 59.3
-
-
Stands (cm)
1.1 x 4.2 x 8
1.2 x 4.4 x 8
1.2 x 4.4 x 8
Box (cm)
20.8 x 20.8 x 2.6
20 x 20 x 2.6
20.5 x 20.5 x 2.6
Weight (g)
527
496
588
* Measurements are indicative due to the natural morphology of the product.
RECOMMENDED INSTRUCTIONS AND PARAMETERS FOR SUBLIMATION PRINTING
Parameters are given for guidance only. It is recommended to carry out preliminary tests in order to make the necessary adjustments before starting production.
WITH A HEAT PRESS
Prepare your design and print it in mirror image
Preheat the press to 200ºC
Place the Nomex pad on the press’ lower platen and protective paper over it to prevent smudging
Place the printed design face up on the Nomex pad and the photo slate face down in direct contact with the printed paper
Fix them with heat-resistant tape
Press for 9 minutes, medium-heavy pressure
Remove the newly printed photo slate using a protective glove
Carefully remove the paper
WITH A 3D OVEN
Print the design in mirror image
Preheat the oven to 200ºC
Place the printed design face down on the white side of the photo slate and fix it with heat-resistant tape
Put the photo slate on the top tray of the oven with the printed side facing upwards
Close the membrane and create a vacuum. Make sure to get rid of any air bubbles
Close the oven for 7-8 minutes
Remove the newly printed photo slate using a protective glove
https://www.brildor.com/en/sublimation-photo-slate-heart-shape25339Sublimation Photo Rock Slate - Heart shape<p><a name="know-more"></a></p>
<h2>More information about the heart-shaped photo rock slate for sublimation</h2>
<p> </p>
<p><strong>INDEX</strong></p>
<p>> <a href="#saber-mas1">Description</a></p>
<p>> <a href="#saber-mas2">Things to keep in mind</a></p>
<p>> <a href="#saber-mas3">Dimensions</a></p>
<p>> <a href="#saber-mas4">Recommended instructions and parameters for sublimation printing</a></p>
<p> </p>
<p><a name="saber-mas1"></a></p>
<p><strong>DESCRIPTION</strong></p>
<ul>
<li>Perfect for modern and rustic decor, as well as a gift for Valentine's or Mother's Day, a wedding, an anniversary or a birthday</li>
<li>Bevelled edges that show the uneven cuts of the stone, simulating the marks of a chisel</li>
<li>Both models include 2 black plastic stands to place the photo slate on flat surfaces</li>
<li>The Ref. 036114 photo slate has 2 holes at the top to insert the jute cord that comes with it. It can be hung on the wall or placed on a table</li>
<li>White printable side delimited by an irregular border. Back in black</li>
<li>Can be personalised with a heat press or vacuum membrane sublimation oven</li>
<li>Durable and long-lasting natural stone</li>
<li>Supplied wrapped in air bubbles inside a cardboard box</li>
</ul>
<p> </p>
<p><a name="saber-mas2"></a></p>
<p><strong>THINGS TO KEEP IN MIND</strong></p>
<ul>
<li>It may have some slight irregularities on its surface due to the natural morphology of the rock from which it is extracted</li>
<li>It is recommended to use a Nomex pad when sublimating with a heat press machine</li>
</ul>
<p> </p>
<p><a name="saber-mas3"></a></p>
<p><strong>DIMENSIONS</strong></p>
<table>
<tbody>
<tr>
<td><strong>Reference</strong></td>
<td style="text-align: center;"><strong>036114</strong></td>
<td style="text-align: center;"><strong>033796<br>056118<br></strong></td>
<td style="text-align: center;"><strong>038063</strong></td>
</tr>
<tr>
<td><strong>Photo frame</strong></td>
<td style="text-align: center;">19 x 19.5 cm</td>
<td style="text-align: center;"> 14.3 x 14.9 cm</td>
<td style="text-align: center;">19.5 x 20 cm</td>
</tr>
<tr>
<td><strong>Print area (cm)</strong></td>
<td style="text-align: center;"><span class="azul-negrita">18.2 x 18.7<br></span></td>
<td style="text-align: center;"><span class="azul-negrita">13.5 x 13.8 </span></td>
<td style="text-align: center;"><span class="azul-negrita">18.3 x 19<br></span></td>
</tr>
<tr>
<td><strong>Finish</strong></td>
<td style="text-align: center;">Gloss</td>
<td style="text-align: center;">Gloss<br>Matte</td>
<td style="text-align: center;">Gloss</td>
</tr>
<tr>
<td><strong>Thickness (mm)<br></strong></td>
<td style="text-align: center;"><span class="azul-negrita">8<br></span></td>
<td style="text-align: center;"><span class="azul-negrita">8<br></span></td>
<td style="text-align: center;"><span class="azul-negrita">8<br></span></td>
</tr>
<tr>
<td><strong>Ribbon (cm)<br></strong></td>
<td style="text-align: center;"><span class="azul-negrita">Ø4 x 59.3<br></span></td>
<td style="text-align: center;"><span class="azul-negrita">-</span></td>
<td style="text-align: center;"><span class="azul-negrita">-<br></span></td>
</tr>
<tr>
<td><strong>Stands (cm)<br></strong></td>
<td style="text-align: center;"><span class="azul-negrita">1.1 x 4.2 x 8<br></span></td>
<td style="text-align: center;"><span class="azul-negrita">1.2 x 4.4 x 8<br></span></td>
<td style="text-align: center;"><span class="azul-negrita">1.2 x 4.4 x 8<br></span></td>
</tr>
<tr>
<td><strong>Box (cm)<br></strong></td>
<td style="text-align: center;"><span class="azul-negrita">20.8 x 20.8 x 2.6<br></span></td>
<td style="text-align: center;"><span class="azul-negrita">20 x 20 x 2.6<br></span></td>
<td style="text-align: center;"><span class="azul-negrita">20.5 x 20.5 x 2.6<br></span></td>
</tr>
<tr>
<td><strong>Weight (g)<br></strong></td>
<td style="text-align: center;"><span class="azul-negrita">527<br></span></td>
<td style="text-align: center;"><span class="azul-negrita">496 </span></td>
<td style="text-align: center;"><span class="azul-negrita">588<br></span></td>
</tr>
</tbody>
</table>
<p><span class="naranja-negrita">*</span> Measurements are indicative due to the natural morphology of the product.</p>
<p> </p>
<p><a name="saber-mas4"></a></p>
<p><strong>RECOMMENDED INSTRUCTIONS AND PARAMETERS FOR SUBLIMATION PRINTING</strong></p>
<p>Parameters are given for <strong>guidance only</strong>. It is recommended to carry out preliminary tests in order to make the necessary adjustments before starting production.</p>
<p><strong>WITH A HEAT PRESS</strong><span style="text-decoration: underline;"><strong><br></strong></span></p>
<ul>
<li>Prepare your design and print it in <strong>mirror image</strong></li>
<li>Preheat the press to <span class="azul-negrita">200ºC</span></li>
<li>Place the Nomex pad on the press’ lower platen and protective paper over it to prevent smudging</li>
<li>Place the printed design face up on the Nomex pad and the photo slate face down in direct contact with the printed paper</li>
<li>Fix them with heat-resistant tape</li>
<li>Press for <span class="azul-negrita">9 minutes</span>, <strong>medium-heavy</strong> pressure</li>
<li>Remove the newly printed photo slate using a protective glove</li>
<li>Carefully remove the paper</li>
</ul>
<p><strong>WITH A 3D OVEN</strong></p>
<ul>
<li>Print the design in <strong>mirror image</strong></li>
<li>Preheat the oven to <span class="azul-negrita">200ºC</span></li>
<li>Place the printed design face down on the white side of the photo slate and fix it with heat-resistant tape</li>
<li>Put the photo slate on the top tray of the oven with the printed side facing upwards</li>
<li>Close the membrane and create a vacuum. Make sure to get rid of any air bubbles</li>
<li>Close the oven for<span class="azul-negrita"> 7-8 minutes</span></li>
<li>Remove the newly printed photo slate using a protective glove</li>
<li>Carefully remove the paper</li>
</ul>https://www.brildor.com/media/catalog/product/p/o/portafotos-piedra-pizarra-forma-corazon-d1.jpg3.95instock03.95000https://www.brildor.com/media/catalog/product/p/o/portafotos-piedra-pizarra-forma-corazon-d1.jpg159672292949541/Blanks/Blanks/Valentine's Day/Blanks/Mother's Day/Blanks/Valentine's Day/Photo Frames & Panels/Blanks/Mother's Day/Picture Frames & Photo Panels/Blanks/Sublimation Photo Panels/Blanks/Sublimation Photo Panels/Rock Slate2021-07-24T06:08:24+0000
How to personalise a photo slate in a 3D oven
