Perfect for placing on garments o accessories as bags, covers, backpacks...
Reversible sequins: one side of white and the other in the chosen colour
Sewn like "mermaid scales". They change sides by moving them up and down with your hand
Reverse side of the patch coated with adhesive. Protected by a liner
The processes of personalisation y tack patching processes can be carried out at the same time
THINGS TO KEEP IN MIND
The adhesive liner only needs to be removed at the time of attachment
Both sides of the sequins are customisable. However, there may be transfer from ink from one side to the other
It is recommended to sublimate the white side for best results
Facilitates adhesion to the patch by pre-ironing the patch fabric before the printing
After finishing the sublimation process before the patches cool down, it is sequins it is advisable to move them from one side to the other several times. This will prevent them from sticking together
They have been made tests of the tack of the patch on fabrics from cotton, polyester y canvas. If it is desired to fix the patch on another type of fabric it is advisable to make tests
RECOMMENDED INSTRUCTIONS AND PARAMETERS FOR SUBLIMATION PRINTING
Parameters given for guidance only. It is recommended to carry out preliminary tests in order to make the necessary adjustments before starting production.
Print the design in mode mirror
Turn all the sequins of the patch over until only the white face is visible
Preheat the press to 180 ºC
Pre-iron the patch garment where you will place the patch. Use protective paper
Peel off the protective film of adhesive that is on the back of the patch
Place the patch on the garment so that the adhesive side is in contact with the patch
Place the printed design on the sequins. Use heat-resistant tape to immobilise the paper the patch and the garment
Close the press at medium pressure for 120 seconds
With the help of a protective glove, remove the newly sublimated garment Remove the freshly sublimated
Carefully peel off the paper
Turn the patches over sequins while they are still hot. If left to cool, it will be difficult to turn them from one side to the other
https://www.brildor.com/en/sublimation-rectangular-reversible-sequin-patchs24468Sublimation Rectangular Reversible Sequin Patchs<p><a name="saber-mas"></a></p>
<h2>More information about the Sublimation Rectangular Reversible Sequin Patchs</h2>
<p> </p>
<p><strong>INDEX</strong></p>
<p>> <a href="#saber-mas1">Description</a></p>
<p>> <a href="#saber-mas2">Things to keep in mind</a></p>
<p>> <a href="#saber-mas3">Template for personalisation</a></p>
<p>> <a href="#saber-mas4">Dimensions</a></p>
<p>> <a href="#saber-mas5">Recommended instructions and parameters for sublimation printing</a></p>
<p> </p>
<p class="enlace"><a id="saber-mas1"></a> </p>
<p><strong>DESCRIPTION</strong></p>
<ul>
<li>Perfect for placing on garments o accessories as bags, covers, backpacks...</li>
<li>Reversible sequins: one side of white and the other in the chosen colour</li>
<li>Sewn like "mermaid scales". They change sides by moving them up and down with your hand</li>
<li>Reverse side of the patch coated with adhesive. Protected by a liner</li>
<li>The processes of personalisation y tack patching processes can be carried out at the same time</li>
</ul>
<p> </p>
<p class="enlace"><a id="saber-mas2"></a> </p>
<p><strong>THINGS TO KEEP IN MIND</strong></p>
<ul>
<li>The adhesive liner only needs to be removed at the time of attachment</li>
<li>Both sides of the sequins are customisable. However, there may be transfer from ink from one side to the other</li>
<li>It is recommended to sublimate the white side for best results</li>
<li>Facilitates adhesion to the patch by pre-ironing the patch fabric before the printing</li>
<li>After finishing the sublimation process before the patches cool down, it is sequins it is advisable to move them from one side to the other several times. This will prevent them from sticking together</li>
<li>They have been made tests of the tack of the patch on fabrics from cotton, polyester y canvas. If it is desired to fix the patch on another type of fabric it is advisable to make tests</li>
</ul>
<p> </p>
<p class="enlace"><a id="saber-mas3"></a> </p>
<p><strong>TEMPLATE TO PERSONALISE</strong></p>
<ul>
<li><a title="Template to sublimate these patches" href="https://www.brildor.com/media/upload/descargas/Plantilla_Parches_Lentejuela_Reversible_Rectangular.psd" target="_blank" rel="noopener">Template to sublimate these patches (.psd - 471Kb)</a></li>
</ul>
<p> </p>
<p class="enlace"><a id="saber-mas4"></a> </p>
<p><strong>DIMENSIONS</strong></p>
<table>
<tbody>
<tr>
<td><strong>Patch (mm)</strong></td>
<td><span class="azul-negrita">210 x 200</span></td>
</tr>
<tr>
<td><strong>Print area (mm)</strong></td>
<td><span class="azul-negrita">210 x 200</span></td>
</tr>
<tr>
<td><strong>Weight (g)</strong></td>
<td><span class="azul-negrita">26</span></td>
</tr>
</tbody>
</table>
<p><strong> </strong></p>
<p class="enlace"><a id="saber-mas5"></a> </p>
<p><strong>RECOMMENDED INSTRUCTIONS AND PARAMETERS FOR SUBLIMATION PRINTING</strong></p>
<p>Parameters given <strong>for guidance</strong> only. It is recommended to carry out preliminary tests in order to make the necessary adjustments before starting production.</p>
<ul>
<li>Print the design in <strong>mode</strong> <strong> mirror</strong></li>
<li>Turn all the sequins of the patch over until only the white face is visible</li>
<li>Preheat the press to <span class="azul-negrita">180 ºC</span></li>
<li>Pre-iron the patch garment where you will place the patch. Use protective paper</li>
<li>Peel off the protective film of adhesive that is on the back of the patch</li>
<li>Place the patch on the garment so that the adhesive side is in contact with the patch</li>
<li>Place the printed design on the sequins. Use heat-resistant tape to immobilise the paper the patch and the garment</li>
<li>Close the press at medium pressure for <span class="azul-negrita">120 seconds</span></li>
<li>With the help of a protective glove, remove the newly sublimated garment Remove the freshly sublimated</li>
<li>Carefully peel off the paper</li>
<li>Turn the patches over sequins while they are still hot. If left to cool, it will be difficult to turn them from one side to the other</li>
</ul>https://www.brildor.com/media/catalog/product/p/a/parches-de-lentejuela-reversible-forma-rectangular-d10.jpg2.49instock02.49000https://www.brildor.com/media/catalog/product/p/a/parches-de-lentejuela-reversible-forma-rectangular-d10.jpg2446524467/Blanks/Blanks/Patches/Outlet/Outlet/Personalizables 2021-07-24T06:06:48+0000
How to sublimate reversible sequins
