Ideal for gifting on special occasions and celebrations such as weddings, communions, Christmas, birthdays...
Unique design for modern and rustic home, office, and shop decoration...
White sublimable face with glossy finish and irregular edge with black reverse
Bevelled edges showing the uneven cuts of the stone, simulating chisel marks
Includes 3 clock hands: hour and minute hands in white and second hand in red
Pair of black plastic stands to place the clock on any flat surface
Durable and resistant natural stone
The rectangular clock can be hung or placed on a surface horizontally or vertically (Ref. 036364)
Presented wrapped in bubble wrap, inside a cardboard box
THINGS TO KEEP IN MIND
May have slight irregularities on its surface due to the natural morphology of the rock from which it is extracted. This does not affect the final print result
The square clock does not have holes for hanging. The rectangular one does
It is recommended to use a Nomex pad for sublimation
If the rectangular clock is hung vertically on the wall, the hole for the clock mechanism will be at the bottom. If hung horizontally, the hole will be to the left of the clock
WHAT DOES THE SLATE STONE CLOCK INCLUDE?
1
Slate stone panel
1
Clock mechanism (battery not included)
3
Aluminium hands (hour, minute, and second)
2
Tabletop stands
DIFFERENT POSITIONS TO HANG THE CLOCK
HUNG
TABLETOP
MEASUREMENTS
Ref.
036115
036364
Shape
Square
Rectangular
Clock (cm)
26.5 x 26.5
24.2 x 39
Thickness (cm)
1
1
Printable area (cm)
25.8 x 25.8
23.5 x 38
Box (cm)
31 x 31 x 3
27 x 39 x 4.5
Weight (g)
2,021
2,462
RECOMMENDED SUBLIMATION INSTRUCTIONS AND PARAMETERS
Parameters indicated are for guidance only. They may vary due to many factors such as the sublimation paper used, inks, or ambient temperature. Therefore, testing is recommended.
TRANSFER PRESS
Print the design in mirror mode
Heat the press to 200 °C
Place the Nomex pad on the base of the press and protective paper over the pad to prevent staining
Place the printed design face up on the Nomex pad and the clock face down in direct contact with the printed paper
Secure them with heat-resistant tape
Close the press with medium-high pressure for 9 minutes
Using a protective glove, remove the newly sublimated clock
Carefully remove the paper
3D OVEN
Print the design in mirror mode
Heat the oven to 200 °C
Place the printed design face down on the white face of the clock and secure it with heat-resistant tape
Place the clock in the top tray of the oven with the printed face up
Close the membrane and create a vacuum. Ensure air bubbles are removed
Close the oven for 7-8 minutes
Using a protective glove, remove the newly sublimated clock
https://www.brildor.com/en/sublimation-rock-slate-clock24398Sublimation Rock Slate Clock<p><a name="know-more"></a></p>
<h2>More information about the Sublimable Rock Slate Clock</h2>
<p> </p>
<p><strong>INDEX</strong></p>
<p>> <a href="#know-more1">Description</a></p>
<p>> <a href="#know-more2">Things to keep in mind</a></p>
<p>> <a href="#know-more3">What does the slate stone clock include?</a></p>
<p>> <a href="#know-more4">Different positions to hang the clock</a></p>
<p>> <a href="#know-more5">Measurements</a></p>
<p>> <a href="#know-more6">Recommended sublimation instructions and parameters</a></p>
<p> </p>
<p class="enlace"><a id="know-more1"></a> </p>
<p><strong>DESCRIPTION</strong></p>
<ul>
<li>Ideal for gifting on special occasions and celebrations such as weddings, communions, Christmas, birthdays...</li>
<li>Unique design for modern and rustic home, office, and shop decoration...</li>
<li>White sublimable face with glossy finish and irregular edge with black reverse</li>
<li>Bevelled edges showing the uneven cuts of the stone, simulating chisel marks</li>
<li>Includes 3 clock hands: hour and minute hands in white and second hand in red</li>
<li>Pair of black plastic stands to place the clock on any flat surface</li>
<li>Durable and resistant natural stone</li>
<li>The rectangular clock can be hung or placed on a surface horizontally or vertically (Ref. 036364)</li>
<li>Presented wrapped in bubble wrap, inside a cardboard box</li>
</ul>
<p> </p>
<p class="enlace"><a id="know-more2"></a> </p>
<p><strong>THINGS TO KEEP IN MIND</strong></p>
<ul>
<li>May have slight irregularities on its surface due to the natural morphology of the rock from which it is extracted. This does not affect the final print result</li>
<li>The square clock does not have holes for hanging. The rectangular one does</li>
<li>It is recommended to use a Nomex pad for sublimation</li>
<li>If the rectangular clock is hung vertically on the wall, the hole for the clock mechanism will be at the bottom. If hung horizontally, the hole will be to the left of the clock</li>
</ul>
<p> </p>
<p class="enlace"><a id="know-more3"></a> </p>
<p><strong>WHAT DOES THE SLATE STONE CLOCK INCLUDE?</strong></p>
<table>
<tbody>
<tr>
<td><span class="azul-negrita">1</span></td>
<td>Slate stone panel</td>
</tr>
<tr>
<td><span class="azul-negrita">1</span></td>
<td>Clock mechanism (battery not included)</td>
</tr>
<tr>
<td><span class="azul-negrita">3</span></td>
<td>Aluminium hands (hour, minute, and second)</td>
</tr>
<tr>
<td><span class="azul-negrita">2</span></td>
<td>Tabletop stands</td>
</tr>
</tbody>
</table>
<p> </p>
<p class="enlace"><a id="know-more4"></a> </p>
<p><strong>DIFFERENT POSITIONS TO HANG THE CLOCK<br></strong></p>
<table>
<tbody>
<tr>
<td style="text-align: center;"><strong>HUNG</strong></td>
<td style="text-align: center;"><strong>TABLETOP<br></strong></td>
</tr>
<tr>
<td>
<p><img src="{{media url="wysiwyg/Personalizables/reloj-sublimacion-piedra-pizarra-esquema-1-ref-924398.jpg"}}" alt="Slate stone clocks for hanging" width="313" height="501"></p>
</td>
<td>
<p><img src="{{media url="wysiwyg/Personalizables/reloj-sublimacion-piedra-pizarra-esquema-2-ref-924398.jpg"}}" alt="Tabletop slate stone clocks" width="321" height="514"></p>
</td>
</tr>
</tbody>
</table>
<p> </p>
<p class="enlace"><a id="know-more5"></a> </p>
<p><strong>MEASUREMENTS</strong></p>
<table>
<tbody>
<tr>
<td><strong>Ref.</strong></td>
<td style="text-align: center;"><strong>036115</strong></td>
<td style="text-align: center;"><strong>036364</strong></td>
</tr>
<tr>
<td><strong>Shape<br></strong></td>
<td style="text-align: center;">Square</td>
<td style="text-align: center;">Rectangular</td>
</tr>
<tr>
<td><strong>Clock (cm)</strong></td>
<td style="text-align: center;"><span class="azul-negrita">26.5 x 26.5</span></td>
<td style="text-align: center;"><span class="azul-negrita">24.2 x 39</span></td>
</tr>
<tr>
<td><strong>Thickness (cm)</strong></td>
<td style="text-align: center;"><span class="azul-negrita">1</span></td>
<td style="text-align: center;"><span class="azul-negrita">1</span></td>
</tr>
<tr>
<td><strong>Printable area (cm) <br></strong></td>
<td style="text-align: center;"><span class="azul-negrita">25.8 x 25.8</span></td>
<td style="text-align: center;"><span class="azul-negrita">23.5 x 38</span></td>
</tr>
<tr>
<td><strong>Box (cm)</strong></td>
<td style="text-align: center;"><span class="azul-negrita">31 x 31 x 3</span></td>
<td style="text-align: center;"><span class="azul-negrita">27 x 39 x 4.5</span></td>
</tr>
<tr>
<td><strong>Weight (g) <br></strong></td>
<td style="text-align: center;"><span class="azul-negrita">2,021</span></td>
<td style="text-align: center;"><span class="azul-negrita">2,462</span></td>
</tr>
</tbody>
</table>
<p> </p>
<p><a name="know-more6"></a></p>
<p><strong>RECOMMENDED SUBLIMATION INSTRUCTIONS AND PARAMETERS</strong></p>
<p>Parameters indicated are <strong>for guidance only</strong>. They may vary due to many factors such as the sublimation paper used, inks, or ambient temperature. Therefore, testing is recommended.</p>
<p><strong>TRANSFER PRESS</strong></p>
<ul>
<li>Print the design in <strong>mirror mode</strong></li>
<li>Heat the press to <span class="azul-negrita">200 °C</span></li>
<li>Place the Nomex pad on the base of the press and protective paper over the pad to prevent staining</li>
<li>Place the printed design face up on the Nomex pad and the clock face down in direct contact with the printed paper</li>
<li>Secure them with heat-resistant tape</li>
<li>Close the press with <strong>medium-high</strong> pressure for <span class="azul-negrita">9 minutes</span></li>
<li>Using a protective glove, remove the newly sublimated clock</li>
<li>Carefully remove the paper</li>
</ul>
<p><strong>3D OVEN</strong></p>
<ul>
<li>Print the design in <strong>mirror mode</strong></li>
<li>Heat the oven to <span class="azul-negrita">200 °C</span></li>
<li>Place the printed design face down on the white face of the clock and secure it with heat-resistant tape</li>
<li>Place the clock in the top tray of the oven with the printed face up</li>
<li>Close the membrane and create a vacuum. Ensure air bubbles are removed</li>
<li>Close the oven for <span class="azul-negrita">7-8 minutes</span></li>
<li>Using a protective glove, remove the newly sublimated clock</li>
<li>Carefully remove the paper</li>
</ul>https://www.brildor.com/media/catalog/product/r/e/reloj-sublimacion-piedra-pizarra-d13.jpg13.75instock013.75000https://www.brildor.com/media/catalog/product/r/e/reloj-sublimacion-piedra-pizarra-d13.jpg15967229292432924400246842707434555/Blanks/Blanks/Clocks/Blanks/Much more2021-07-24T06:06:34+0000
How to personalise a photo rock slate in a 3D oven
