Search
Starting at:
€5.06
/ Each Unit
Sublimation Wine Bottle Cooler
Ref.
049887
Wine cooler sleeve you can personalise dye sublimation printing.
Elastic bands on the sides allowing it to adapt to different bottle sizes: wine, water, champagne, beer and more
- Made of white neoprene with black trim
- Includes 2 gel packs to keep the bottle at the desired temperature
- With 2 internal pockets to insert the gel packs
- Suitable for bottles up to 7 and 8.5 cm in diameter
- Print area (per side): 9.5 x 19 cm
Availability:
Immediate: 0 units
Expected entries:
26/02/25: 20 units
Expected entries:
26/02/25: 20 units
Please, give us an estimate of the quantity you need:
As a Premium Brildor Member, for each unit you buy, you will accumulate {{POINTS}}
to redeem on your next order. Discover the Brildor Loyalty Program.
For each unit you buy, you will accumulate {{POINTS}} to redeem
on your next order. Discover the Brildor Loyalty Program.
€5.95
VAT not included
/ Each Unit
- Buy 2 for €5.65 each
- Buy 5 for €5.36 each
- Buy 25 for €5.06 each
Please, give us an estimate of the quantity you need:
We'll let you know as soon as it's available.
This is a non-binding service.
This is a non-binding service.
Related Products
More information about the sublimation wine bottle cooler
INDEX
> Recommended instructions and parameters for sublimation printing
DESCRIPTION
- Thick, padded material to protect the bottle. Prevents the bottle from slipping out of your hand
- Open at the top and bottom
- The two gel packs are reusable and can be kept in the freezer
- Perfect for promotional merchandise, souvenirs and special events
- In Related Products, you will find a pillow box Ref. 049664 for packing the personalised bottle cooler
THINGS TO KEEP IN MIND
- It is recommended to protect the black trim by covering it with heat-resistant tape and protective paper so that it does not get damaged during sublimation
- Take out the gel packs during the sublimation process
DIMENSIONS
| Sleeve (cm) | 11 x 20.5 |
| Gel ice packs (cm) x 2 | 9 x 12.5 |
| Elastic bands (cm) | 2 x 12 |
| Max. bottle diameter (cm) |
8.84 cm |
| Print area (cm per side) | 9.5 x 19 |
| Weight (g) | 230 |
RECOMMENDED INSTRUCTIONS AND PARAMETERS FOR SUBLIMATION PRINTING
- Print the design in mirror image
- Preheat the press to 200ºC
- Place the sleeve on the lower platen of the press with the printed paper against the white side. Fix them with heat-resistant tape
- Cover the black trim with heat-resistant tape to avoid damaging it
- Press for 50 seconds, medium pressure
- Remove the newly printed bottle cooler using a protective glove
- Carefully peel off the paper
- Repeat the process to sublimate the other side
WASHING RECOMMENDATIONS
- Wash inside out in cold or lukewarm water
- Avoid using bleach
- Air dry
| Ref. | 049887 |
|---|---|
| Gross Weight (kg) | 0,230 |
| Billable Weight (kg) | 0.2530 |
| Dimensions (mm) | 110 x 205 |
| Print area (mm) | 950 x 190 |
| Colour | White |
| Items | Bottle covers |
| Composition | Neoprene |
| Marking techniques | Dye sublimation |
Write Your Own Review
Post your question