Tubitherm Flock Heat Transfer Vinyl Sample Pack

More information about the Tubitherm heat transfer vinyl sample pack from Poli-Tape

• Starter pack for those who want to get into textile personalisation using flock HTV.
• Perfect for personalisation tests on T-shirts, sportswear, sports bags or promotional items.
• This sample pack includes the complete colour chart to check first-hand the quality and finish of the vinyl, so you can later purchase the items that best suit your needs.
• It contains vinyl sheets that are larger than A4, allowing for more versatile applications.
• The sheets are 33 cm wide, suitable for use without a cutting mat with Cricut Maker 3 and Cricut Explore 3 vinyl cutters.
• Suitable for cotton, polyester/cotton, and natural/synthetic fabrics without water-repellent coating.
• You will not need any additional carrier sheets, as they come attached to the vinyl and are easily identifiable.
• Delivered in a black bubble envelope with a convenient closing clip.
• In Related Products, you will find this vinyl in larger formats, with specific information about each one, including instructions for use.

WHAT DOES THIS SAMPLE PACK INCLUDE?

• 31 vinyl sheets (25 x 33 cm approx.): 24 sheets with standard colours, 1 white blockout sheet, and 6 with neon colours.
  
• 1 card with 33 real Tubitherm samples in different colours (33 x 12 mm) and additional technical details.

COLOURS INCLUDED IN THE SAMPLE PACK

• 24 standard colours: white, black, lemon, honey yellow, yellow, orange, red, signal red, light rose, magenta, pink, bordeaux, berry, blue, ice blue, sky blue, navy blue, purple, green, grass green, mocca, brown, grey, and anthracite.
• 1 blockout white.
• 6 neon colours: neon blue, neon yellow, neon green, neon orange, neon red, and neon pink.

DOWNLOAD HERE

• Colour card for Tubitherm HTV (.pdf - 843 kB).
• Data sheet for Tubitherm HTV (.pdf - 616 kB).
• Data sheet for Tubitherm Blockout White HTV (.pdf - 617 kB).

COLOUR REFERENCE LIST

Find Pantone, HEX, RGB, CMYK and RAL equivalents:

• Colour reference list Tubitherm (.pdf - 0,51 MB)

Recommendations for use and application

• Suitable for plotter cutting. We recommend using a standard blade with a 45º angle.
• After the heat transfer, warm peel the transfer tape.
• Wash the garments inside out at a maximum temperature of 40ºC for neon colours and 60ºC for standard and blockout white colours.
  
• This vinyl is suitable for tumble drying and dry cleaning.

THINGS TO KEEP IN MIND

• The instructions given are based on our knowledge and tests carried out with our equipment, which is why we always recommend that you test it yourself to determine the best parameters for each case.
• Many factors could impact the application of this product, as well as on its washing conditions. For this reason, we can only accept liability for unhandled material.

Recommended instructions and application parameters

• Cut out the design in mirror image with a vinyl cutter and a 45º blade.
• With a hook, remove the excess vinyl leaving on the liner the design you want to apply.
• Preheat the press to 160ºC
• Place the garment on the press’ lower platen and the design on top.
• Cover with protective paper to protect the vinyl and the fabric.
• Press for 15 seconds, medium pressure.
• Cover the vinyl with protective paper.
• Remove the liner when hot, but not immediately. Wait until it becomes lukewarm.

^(*) We recommend running some tests to adjust the application parameters according to the press you will be using.