Colourless liquid adhesives suitable for bonding transparent, coloured, or opaline acrylics
Easy to use: includes an application needle for more precise and uniform adhesion
Resistant to UV rays and moisture
For indoor or outdoor applications
THINGS TO KEEP IN MIND
We recommend testing before starting production. Some acrylics may have an additional layer of another material that is not compatible with the adhesive
After full curing, the pieces are firmly bonded with a transparent finish
In outdoor applications, avoid moisture during curing
COMPATIBILITY WITH OTHER PLASTICS
✔
✗
Styrene Acrylonitrile (SAN)
Polystyrene (PS)
Polyvinyl Chloride (PVC)
Acrylonitrile Butadiene Styrene (ABS)
Acrylonitrile Styrene Acrylate (ASA)
Polyethylene (PE)
Polypropylene (PP)
Polyethylene Terephthalate (PET)
Polyoxymethylene or Acetal (POM)
Ethylene Propylene Diene Monomer (EPDM)
Polytetrafluoroethylene/Teflon (PTFE)
GENERAL USAGE INSTRUCTIONS
Preparation: the surfaces to be bonded must be clean and dry
Application: use the included needle to apply a small amount of adhesive to the surfaces to be joined
Joining the pieces: before the adhesive evaporates, join the acrylic pieces and hold them firmly. You can use clamps
Drying: allow to dry for at least 24 h for the adhesive to fully harden
Final handling and storage: once the adhesive is cured, remove any clamps and handle the piece normally
USAGE RECOMMENDATIONS
Keep the product away from heat sources
Use gloves, goggles, and protective clothing during application
Store in a well-ventilated place and out of reach of children
https://www.brildor.com/en/adhesive-pmma-acrylics52952Adhesive for PMMA Acrylics<p><a name="know-more"></a></p>
<h2>More information about the Adhesive for PMMA Acrylics</h2>
<p> </p>
<p><strong>INDEX</strong></p>
<p>> <a href="#know-more1">Description</a></p>
<p>> <a href="#know-more2">Things to keep in mind</a></p>
<p>> <a href="#know-more3">Compatibility with other plastics</a></p>
<p>> <a href="#know-more4">General usage instructions</a></p>
<p>> <a href="#know-more5">Usage recommendations</a></p>
<p>> <a href="#know-more6">Technical data sheet</a></p>
<p>> <a href="#know-more7">Safety data sheet</a></p>
<p> </p>
<p><a name="know-more1"></a></p>
<p><strong>DESCRIPTION</strong></p>
<ul>
<li>Colourless liquid adhesives suitable for bonding transparent, coloured, or opaline acrylics</li>
<li>Easy to use: includes an application needle for more precise and uniform adhesion</li>
<li>Resistant to UV rays and moisture</li>
<li>For indoor or outdoor applications</li>
</ul>
<p> </p>
<p><a name="know-more2"></a></p>
<p><strong>THINGS TO KEEP IN MIND</strong></p>
<ul>
<li>We recommend testing before starting production. Some acrylics may have an additional layer of another material that is not compatible with the adhesive</li>
<li>After full curing, the pieces are firmly bonded with a transparent finish</li>
<li>In outdoor applications, avoid moisture during curing</li>
</ul>
<p> </p>
<p><a name="know-more3"></a></p>
<p><strong>COMPATIBILITY WITH OTHER PLASTICS</strong></p>
<table>
<tbody>
<tr>
<td style="text-align: center;"><span class="verde-negrita">✔</span></td>
<td style="text-align: center;"><strong><span class="rojo-brildor">✗</span></strong></td>
</tr>
<tr>
<td>
<p>Styrene Acrylonitrile (<strong>SAN</strong>)</p>
<p>Polystyrene (<strong>PS</strong>)</p>
<p>Polyvinyl Chloride (<strong>PVC</strong>)</p>
<p>Acrylonitrile Butadiene Styrene (<strong>ABS</strong>)</p>
<p>Acrylonitrile Styrene Acrylate (<strong>ASA</strong>)</p>
</td>
<td>
<p>Polyethylene (<strong>PE</strong>)</p>
<p>Polypropylene (<strong>PP</strong>)</p>
<p>Polyethylene Terephthalate (<strong>PET</strong>)</p>
<p>Polyoxymethylene or Acetal (<strong>POM</strong>)</p>
<p>Ethylene Propylene Diene Monomer (<strong>EPDM</strong>)</p>
<p>Polytetrafluoroethylene/Teflon (<strong>PTFE</strong>)</p>
</td>
</tr>
</tbody>
</table>
<p> </p>
<p><a name="know-more4"></a></p>
<p><strong>GENERAL USAGE INSTRUCTIONS</strong></p>
<ol>
<li><strong>Preparation</strong>: the surfaces to be bonded must be clean and dry</li>
<li><strong>Application</strong>: use the included needle to apply a small amount of adhesive to the surfaces to be joined</li>
<li><strong>Joining the pieces</strong>: before the adhesive evaporates, join the acrylic pieces and hold them firmly. You can use clamps</li>
<li><strong>Drying</strong>: allow to dry for at least <span class="azul-negrita">24 h</span> for the adhesive to fully harden</li>
<li><strong>Final handling and storage</strong>: once the adhesive is cured, remove any clamps and handle the piece normally</li>
</ol>
<p> </p>
<p><a name="know-more5"></a></p>
<p><strong>USAGE RECOMMENDATIONS</strong></p>
<ul>
<li>Keep the product away from heat sources</li>
<li>Use gloves, goggles, and protective clothing during application</li>
<li>Store in a well-ventilated place and out of reach of children</li>
</ul>
<p> </p>
<p><a name="know-more6"></a></p>
<p><strong>TECHNICAL DATA SHEET</strong></p>
<table>
<tbody>
<tr>
<td><strong>Composition</strong></td>
<td>Methyl acetate <span class="azul-negrita">98/100 %</span></td>
</tr>
<tr>
<td><strong>Capacity (ml)</strong></td>
<td><span class="azul-negrita">100</span></td>
</tr>
<tr>
<td><strong>EAN/GTIN </strong></td>
<td>4260604220037</td>
</tr>
<tr>
<td><strong>CAS Number</strong></td>
<td>79-20-9</td>
</tr>
<tr>
<td><strong>EG Number</strong></td>
<td>201-185-2</td>
</tr>
<tr>
<td><strong>Setting time (min)</strong></td>
<td><span class="azul-negrita">30</span></td>
</tr>
<tr>
<td><strong>Hardening time (h)</strong></td>
<td><span class="azul-negrita">24</span></td>
</tr>
<tr>
<td><strong>Weight (g)</strong></td>
<td><span class="azul-negrita">93</span></td>
</tr>
</tbody>
</table>
<p> </p>
<p><a name="know-more7"></a></p>
<p><strong>SAFETY DATA SHEET</strong></p>
<p><a href="https://tinyurl.com/24fvfgy2" target="_blank" rel="noopener">Safety data sheet for PMMA acrylic adhesive (.pdf - 0.47 MB)</a></p>https://www.brildor.com/media/catalog/product/a/d/adhesivo-acr_licos-pmma-d1.jpg16.5instock016.5000https://www.brildor.com/media/catalog/product/a/d/adhesivo-acr_licos-pmma-d1.jpg49566/Blanks/Blanks/Sublimation Panels/Laser/Laser/Accessories and Consumables/Blanks/Tools & Accessories/Blanks/Sublimation Panels/Stands & Accessories/Blanks/Sublimation Photo Panels/Laser/Materials for Cutting and Engraving/Blanks/Sublimation Photo Panels/Stands & Accessories2024-10-15T12:51:39+0000
Cómo pegar acrílico o metacrilato para hacer trofeos, rótulos y placas